.png "Powered by vBulletin")
Does anyone know of a smaller fuel tap that will fit my 78 GS1000 . With the new engine mods and the 36 mm carbs my stock fuel tap hits the carbs when tank is installed in the stock position. When I lift the tank so it clears it miss alignes the pin stripping and causes the seat to catch on the plastic trim to the back of the tank.
-
1984 GS1100GK newest addition to the heard
80 GS 1000gt- most favorite ride love this bike
1978 GS1000E- Known as "RoadKill" , Finished :D
83 gs750ed- first new purchase
85 EX500- vintage track weapon
1958Ducati 98 Tourismo
“Remember When in doubt use full throttle, It may not improve the situation ,but it will end the suspense ,
If it isn't going to make it faster or safer it isn't worth doing -
which fuel tap do you have now, the old one with lever and holes at 40 mm or the vacuum one with
holes at 50 mm ? Got a pic ?Rijk
Top 10 Newbie Mistakes thread
CV Carb rebuild tutorial
VM Carb rebuild tutorial
Bikecliff's website
The Stator Papers
"The thing about freedom - it's never free" -
Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533Comment
-
good suggestion.
Solution on p56, hope it works for ts
Rijk
Top 10 Newbie Mistakes thread
CV Carb rebuild tutorial
VM Carb rebuild tutorial
Bikecliff's website
The Stator Papers
"The thing about freedom - it's never free"Comment
.png)
Comment