Announcement

Collapse
No announcement yet.

Drilled out the slides on my GSXR 38 carbs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Drilled out the slides on my GSXR 38 carbs

    I'd drilled out the two slide holes in each of my slides (3mm) and boy do they snap open now and with 150 jets the bike would bogg down due to being lean. To fix it 160 jets went back in and she sounds crisp again.

    I'm thinking the slides were not opening to their full'est until I'd drilled them out.

    I don't see how some folks can run 135, 138 or even 140's jets. My bike would'nt run on them even when it was at 1075 with 34 carbs and K&N filter's. Go figure?
    1166cc 1/8 ET 6.09@111.88
    1166cc on NOS, 1/8 ET 5.70@122.85
    1395cc 1/8 ET 6.0051@114.39
    1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
    01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82
Working...
X