.png "Powered by vBulletin")
Building a '78 gs750 cafe racer and looking for a source for shorter clutch and throttle cables. The new clip on handlebars are a bit shorter than original.
Thx. Bill
Thx. Bill
-
-
use the cables from a gs1100. they are shorter. I did that with my gs850
1981 Suzuki GS850gl, Café Racer!
Built, not Bought! -
That's good to know.... someone also suggested I look at motion pro, ThanksComment
-
Motion pro is probably fine, however, I'm also looking for shorter cables and my local speed shop suggested that I call Barnett (USA). They apparently make shorter cables. It appears that they require one to call them: "TO ORDER CUSTOM LENGTH OR "ONE OFF" CABLES, PLEASE CONTACT US AT 805-642-9435 AND WE WILL BE HAPPY TO ASSIST YOU".Originally posted by Canadian8apilot View PostComment
-
How about cables from a gs 1000s the bars are shorter. because im putting Renthal 755 bars on my GS1000cLast edited by Guest; 10-04-2017, 12:59 AM.Comment
-
If you are confident in soldering new cable ends on you can cut your existing cables to any length you want.Current:
Z1300A5 Locomotive (swapped my Intruder for it), GS450 Cafe Project (might never finish it....), XT500 Commuter (I know - it's a Yamaha :eek:)
Past:
VL1500 Intruder (swapped for Z1300), ZX9R Streetfighter (lets face it - too fast....), 1984 GSX750EF, 1984 GSX1100EF (AKA GS1150)
And a bunch of other crap Yamahas....Comment
-
Motion sell a kit to make your cable,
You can buy only the end you need too.
This is the kit I have,
Marc
https://fortnine.ca/en/motion-pro-ca...IaArOQEALw_wcBhttps://www.thegsresources.com/_foru...ie_twisted.gif AIR COOLED MONSTERS NEVER DIE https://www.thegsresources.com/_foru...ie_twisted.gif
1978 GS1000C X2
1978 GS1000E X2
1979 GS1000S
1979 gs1000
1983 gs400eComment
-
Canadian8apilot I am actually looking for the same thing for the exact same year and model. You’ll have to let me know if you have any luck with anythingComment
Comment