Announcement

Collapse
No announcement yet.

750/850 swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    750/850 swap

    So I know this is a common ask but here I go. I have an 82 gs750 and am planning to swap in the 850 jugs with some 1.0 mm overbore pistons. My question is on where should I start for rejetting the carbs and how I should go about with the ignition system. Right now the bike is bone stock with aftermarket headers. Upgrading because I need to replace the gaskets and pistons anyway so figured go big or go home.

    #2
    The 750 to 850 swap is limited to the 1st gen 750. You have the 2nd gen engine so the 850 parts won't fit.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment

    Working...
    X