Announcement

Collapse
No announcement yet.

82 gs750 question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    82 gs750 question

    Ok, im new to the 4v stuff so learn me.
    Can you swap the later 83 750 topend on? Ok what about the rear swing arm, will the aluminum 1100e swinger fit? Any other basic tidbits you wanna tell me (performance basics of these 4v) what carbs came on it?
    I build Pipers

    https://farm5.staticflickr.com/4842/...b592dc4d_m.jpg

    #2
    I’ll answer the stuff I’m 100% certain on -

    bs32 carbs

    1100 alloy arm fits dimensionally but the 750 frame uses a smaller (14mm) diameter pivot pin so either spacers in the arm or line bore the frame (1100 has a 16mm pin)

    this is was an 82 750E with a blown Motor ...... then some gsxrparts appeared cheaply then an 83 1100E parts bike and, well, I got carried away

    C607BBAF-FDF3-4B1C-9654-929707D8B8D2.jpg
    Last edited by bsharpish; 11-15-2017, 01:02 AM.
    78 GS1000C- Now sporting 1100E suspension and numerous goodies
    82 GS750E/82 1100E/ GSXR Frankenstein bike completed
    83 1100E "rescue bike" saved from the barn
    2008 Bking - Torque Torque Torque
    Next project slowly coalescing

    Comment


      #3
      Best way to get reliable power out of the 16V 750 ....... put in an 1100/1150 Air cooled or any 750cc-1200cc oil boiler

      heres a a mock up of an 1127gsxr lump in a 750E
      Attached Files
      Last edited by bsharpish; 11-15-2017, 12:58 AM.
      78 GS1000C- Now sporting 1100E suspension and numerous goodies
      82 GS750E/82 1100E/ GSXR Frankenstein bike completed
      83 1100E "rescue bike" saved from the barn
      2008 Bking - Torque Torque Torque
      Next project slowly coalescing

      Comment

      Working...
      X