Can you swap the later 83 750 topend on? Ok what about the rear swing arm, will the aluminum 1100e swinger fit? Any other basic tidbits you wanna tell me (performance basics of these 4v) what carbs came on it?
Announcement
Collapse
No announcement yet.
82 gs750 question
Collapse
X
-
I’ll answer the stuff I’m 100% certain on -
bs32 carbs
1100 alloy arm fits dimensionally but the 750 frame uses a smaller (14mm) diameter pivot pin so either spacers in the arm or line bore the frame (1100 has a 16mm pin)
this is was an 82 750E with a blown Motor ...... then some gsxrparts appeared cheaply then an 83 1100E parts bike and, well, I got carried away
C607BBAF-FDF3-4B1C-9654-929707D8B8D2.jpgLast edited by bsharpish; 11-15-2017, 01:02 AM.78 GS1000C- Now sporting 1100E suspension and numerous goodies
82 GS750E/82 1100E/ GSXR Frankenstein bike completed
83 1100E "rescue bike" saved from the barn
2008 Bking - Torque Torque Torque
Next project slowly coalescing
-
Best way to get reliable power out of the 16V 750 ....... put in an 1100/1150 Air cooled or any 750cc-1200cc oil boiler
heres a a mock up of an 1127gsxr lump in a 750EAttached FilesLast edited by bsharpish; 11-15-2017, 12:58 AM.78 GS1000C- Now sporting 1100E suspension and numerous goodies
82 GS750E/82 1100E/ GSXR Frankenstein bike completed
83 1100E "rescue bike" saved from the barn
2008 Bking - Torque Torque Torque
Next project slowly coalescing
Comment
Comment