Thanks guys
Announcement
Collapse
No announcement yet.
Adjustable levers any suggestions??!
Collapse
X
-
Adjustable levers any suggestions??!
Can anyone suggest a good master cylinder/adjustable brake lever combo that works with twin rotors? I'm having to redo my entire front end braking system and thought I'd upgrade the levers, both clutch and brake, for a better fit and feel. My bike is a 79, GS550e.
Thanks guysTags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13994
- London, UK to Redondo Beach, California
Look at one of the smaller Ninja's if yours is a single brake model. The EX650 if it's dual brake. Single brake has 14mm piston the dual has 16mm (5/8")1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
-
Avoid the cheap Chinese brands. I've dealt with these on sport bikes and I often see sloppy fitment, some that don't reach the brake switch and some especially for Suzuki that I've had to pull up on to activate the clutch safety switch. This has occurred on GSXR 600s, 750s and 1000s, Busas and M109s. Also on Ninja 500s you couldn't extend the clutch lever out past the 3rd mark.:cool:GSRick
No God, no peace. Know God, know peace.
Eric Bang RIP 9/5/2018
Have some bikes ready for us when we meet up.
Comment
-
I have Bandit levers on my GS1000 which were a straight swop on both sides, bear in mind that you will have a cable clutch so ensure you get the right lever.Jeff
Living the dream...
1980 GS1000 that has been modestly modified. https://www.thegsresources.com/_foru...ilies/cool.png
Comment
-
Wes51st
Comment
Comment