Announcement

Collapse
No announcement yet.

Help with engine ID?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Help with engine ID?

    I was told by the PO that my 81 gs750 had a 82 gs1100 engine.
    I would like to know what it really is?
    #ontop of engine above clutch cover. GS110X-110092.
    Help!
    I've looked all over the web, can find frame ID he'll but none for engine?
    Thanks
    Tags: None
    #2
    I believe the cc's are stamped on the block (cylinders).
    1982 GS1100E "Jolene"

    Comment

      #3
      On the front, perhaps under the exhausts?

      And then, should it be 1100, remember there are still two possibilities: E (4 valve) vs G (2 valve). I know the 4 valve is measured (stamped) as either 1074 or 1075cc, don't know about the two valve. Keep your fingers crossed for the big 4 valve!
      1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

      2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

      Comment

        #4
        Yes I'm sure of the ccs, it's the year I'd like to know. I put a 1166 jug off a x race bike and g3 cams, bolted right up. Just curious bout the correct year? I'm trying to order the decal, emblems that stick on ea side of engine, 1 of mine, 3-7/8, the other, 3-5/8. The set on e Bay for 81-82, are both the same size. I've found a set that reads tscc, that are 1 larger than the other, which is what I think I need?

        Comment

          #5
          If its a 4 valve, and it hasn't been repainted, if its silver its prob a 80-82 and if its black its an 83.
          1982 GS1100E "Jolene"

          Comment

            #6
            It's silver, it's a 16 valve. I put the 1166 in and had the valves ground. The cover in front of the clutch has a smaller emblem than the one on the other side of bike. The set on e Bay for a 82 are the same size. They both have (SUZUKI) on them. The set for 83, has 1 larger and 1 smaller, with (SUZUKI TSCC) on them. I believe the tscc emblems will fit. Their 40$ a set ,and I want to get the correct ones.

            Comment

              #7
              Originally posted by 81gs7501166 View Post
              It's silver, it's a 16 valve. I put the 1166 in and had the valves ground. The cover in front of the clutch has a smaller emblem than the one on the other side of bike. The set on e Bay for a 82 are the same size. They both have (SUZUKI) on them. The set for 83, has 1 larger and 1 smaller, with (SUZUKI TSCC) on them. I believe the tscc emblems will fit. Their 40$ a set ,and I want to get the correct ones.
              My 82 has the TSCC on them.
              1982 GS1100E "Jolene"

              Comment

                #8
                GSX110=1100 16v. chain drive engine....simple.
                or what the op said...i may have the X in the wrong place.

                Comment

                  #9
                  Ok, thanks guys, I'm ordering the tscc emblems. Rain hear today, I'm pulling all side covers and hitting them with jewlers rouge and my polishing wheel. I used the Wrong alum cleaner, and they all got acid marks. Benn over 10 years since last polish, they were loosing luster anyway.
                  Any special tips on these emblems install?

                  Comment

                  Previous template Next
                  Working...
                  X