Announcement

Collapse
No announcement yet.

S&W Street Stroker shocks ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    S&W Street Stroker shocks ?

    hey guys,

    you guys know anything about S&W Street Stroker shocks. are they any good, what bikes did these shocks go on. the ones i found have eyes on both ends so they would only fit my 550 not the 1000.

    thanks for any feed back

    -ryan
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.

    #2
    I saw a set on an 82 gs1100E. I think they are equiv. to progressives entry level shocks.
    KATANA CUSTOMS/TECH

    Instagram: @rjmedia.tech, Updated more often, even from the events

    Comment


      #3
      are you getting the same size shock, or are these shocks longer?

      Comment


        #4
        I had street strokers back in the 80s..are they still making them? Thought they quit years ago as I was unable to replace them. I though they worked great.

        The ones I had were gas charged, two springs each side to give progressive rate suspension. Multi valve damping (6 or 8 stages I think from memory). I had them on my GS1000 with the clevis bottom. I got 48,000kms out of them. The first staged in the damping had gone, so was very bouncy on smooth roads at speed. On bumpy roads still ok. I would have put some more on if they still made them (1984).

        Comment


          #5
          they are 13.5" same length as the 550's i found them for auction are they worth 75 to get and put on the 550?

          unforutently htey don't have the clevis mout kind only eye mount.




          -ryan
          78 GS1000 Yosh replica racer project
          82 Kat 1000 Project
          05 CRF450x
          10 990 ADV-R The big dirt bike

          P.S I don't check PM to often, email me if you need me.

          Comment


            #6
            If they are guaranteed to be hardly used, perhaps, but mounting is one problem. Also, depends what bike they are off. The springs may be set up for a much heavier bike.

            Comment


              #7
              I had a set of those back in early 80's on my 1000. The seals leaked after just 8 months. 6 month warranty, not rebuildable. Never bought their stuff again.
              And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
              Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!

              Comment


                #8
                They were gas charged and not rebuildable. I wore mine out, at least the first stages of the damping. Sounds like they may be a bit variable then, as I thought they were great until I got the Fournales.

                Before that I had blown the seals on one set of rebulidable shocks a few times, so I gave up on them. Harsh riding too. (An Italian brand starting with M)

                Comment


                  #9
                  Originally posted by saaz
                  An Italian brand starting with M)
                  That would be Marzzochi. (spelling?) I had a set of those too. The red ones with the seperate air/gas chamber.
                  Hey!! You been copying me?
                  And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
                  Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!

                  Comment


                    #10
                    That was years ago (just 20!!). I should have kept a set of spare shocks for those time you need to get the good ones serviced..but then that is what an extra bike is for, to save money

                    Comment

                    Working...
                    X