GS1100G_anybody made rearsets?

[Buffalo Bill]

My latest mod impulse is moving my pegs back a 2-3 inches.
Actually been on my mind for at least a decade.
Not that I hate the standard set, but they would be more comfortable moved back, plus unload some steel.
1100G is not a skunk so different mounting bolt pattern.
Looks Like I'll have to fabricate a mounting plate for some ebay universal rearsets, plus levers and push rods.
Anybody done something similar?
Thanks!

[Rich82GS750TZ]

Watched this guy’s whole series on building a GS 750 cafe racer. Not my thing but nice work with less than professional tools. This is the one where he built the rear sets. But they’re all worth a look.

and this one

[Buffalo Bill]

Thanks, useful info there.
As I figured, the levers and pushrods are the difficult parts.

[Deuce]

They must have made them. I have them on my bike.

[Buffalo Bill]

It would be nice to buy a bolt on set, or at least some of the parts.

[Tom R]

I like the idea of folding pegs vs fixed pegs that could lift your wheel off the ground if you hit them.... maybe fit some from another bike?

[Rob S.]

They must have made them. I have them on my bike.

I was gonna say, there's a member who's bike...customized by magazine...yadda yadda. Ask him for some pics if you'd like to see.

[Buffalo Bill]

I looked at the rear sets on my 87 Honda CBR, and there's everything I need right there.
Not to strip from Paul to give to Peter, I'll look at various salvaged rear sets from different bikes on ebay, and figure witch will adapt mo betta.

[Deuce]

I was gonna say, there's a member who's bike...customized by magazine...yadda yadda. Ask him for some pics if you'd like to see.

I can do that. I'll pull the bike out tomorrow and take pics. As far as having folding pegs ? I can't tell you how many times that fixed peg has torn my shin up when I walk by it.

[Buffalo Bill]

Thanks Deuce!

[bobtail84]

I have tarozzi rear sets and they have the folding peg option so you could just buy the pegs and make the rest yourself.

Tarozzi 2.jpg

[limeex2]

I used a Hyabusa set. Lots of them on E-Bay. Link where it goes onto shift shaft is proper. Plenty of room on the right side for brake master cyl. Make your own plates. My plates are tacky, crude garage style but work. Kinda like me...

[Buffalo Bill]

Thanks all for these tips.

[Dogma]

I used a Hyabusa set. Lots of them on E-Bay. Link where it goes onto shift shaft is proper. Plenty of room on the right side for brake master cyl. Make your own plates. My plates are tacky, crude garage style but work. Kinda like me...

Now that is right up my alley. Like Bill, I've been thinking about this for a decade. Do you have pics? I'm curious what kinds of fabricobling might be required.

Edit: OK, I did some googling. It looks like what's need is a flat or nearly flat plate to adapt from the stock peg mounts to the rearsets. Like maybe a 1/'4 inch thick, drill some holes, saw the profile and grind. Maybe paint. Yes?

Edit the 2nd: I ordered some. I'll have to beat them up a little more to make them match my bike.