Announcement

Collapse
No announcement yet.

Base gasket material

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Base gasket material

    I need thick base basket, block is not high enoght anomore,
    I have heard that usually they are made of copper, can I use aluminium instead?
    Should I use some glue when I install that aluminiun or copper gasket?

    #2
    I think the copper would seal better than aluminum. Copper spray bothsides of gasket and let dry for couple hours then install. Or some other high quality gasket sealant. Just be careful around the oil passages on the outer studs.
    1166cc 1/8 ET 6.09@111.88
    1166cc on NOS, 1/8 ET 5.70@122.85
    1395cc 1/8 ET 6.0051@114.39
    1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
    01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

    Comment


      #3
      check these people

      Comment

      Working...
      X