Announcement
Collapse
No announcement yet.
clutch assembly
Collapse
X
-
Anonymous
clutch assembly
i have a 83 gs1100e and i want to know how many friction disks and metal disk is required? one more question . does the inner hub spin freely in the cluch basket after the center bolt is toruqued? thanks everyone , lugnutTags: None
-
Forum LongTimerCharter Member
GSResource Superstar
Past Site Supporter- May 2002
- 17921
- The only Henniker on earth
Should take 10 friction and 11 metal. The hub spins freely if the bike is in neutral.Currently bikeless
'81 GS 1100EX - "Peace, by superior fire power."
'06 FZ1000 - "What we are dealing with here, is a COMPLETE lack of respect for the law."
I ride, therefore I am.... constantly buying new tires.
"Tell me what kind of an accident you are going to have, and I will tell you which helmet to wear." - Harry Hurt
-
Anonymous
torqued center nut
I torque the center nut on my 82 gs 1100e, torque to 36 ft/lbs and the hub would not spin, I loosen it up some and it spins freely. Any advice on what could be wrong?
Comment
Comment