.......because I have the same model.Kinda clueless,so I copy off of you guys!
Announcement
Collapse
No announcement yet.
Clouds GS Restoration Log
Collapse
X
-
T-Dog
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Great job so far. Keep up the good work.
Couple of comments...
Not sure if your 750 tach is the same as a 450 tach, but I took off the metal bezel around the top of the gauge by bending the lip back. Once the ring is off, the glass comes off as well. All you have to do is come up with a good pieces of glass to put back on.
Regarding the coils, 1 ohms is not enough resistance. Take a look in your service manual but I think you are supposed to have three ohms resistance. I've heard of people using a ballist resistor from an early Chrysler car to increase the resistance up to a useable level. Something to consider.
Good luck.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Originally posted by highmileage View Post
Gotta say that I love the look of your T, although I think I slightly prefer the red over the gray.
Too bad the V&H guys weren't much help in sorting out what was THEIR screwup on the emblem. Hope you have luck fitting the muffler w/o damaging the pipe.
The mufflers fitted and ready to go.
I like the red/black also but the tank I used was a NOS tank so I couldn't be too picky. Plus it looks gorgeous in person.
And we'll get to ride soon enough. I will be in OC this August for sure with the 750T.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Originally posted by Nessism View PostGreat job so far. Keep up the good work.
Couple of comments...
Not sure if your 750 tach is the same as a 450 tach, but I took off the metal bezel around the top of the gauge by bending the lip back. Once the ring is off, the glass comes off as well. All you have to do is come up with a good pieces of glass to put back on.
Regarding the coils, 1 ohms is not enough resistance.
Good luck.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Well I can't claim to not be ordering any more parts... Not until she is done. I am ordering the H4 upgrade for the front headlight, new chrome trim ring and bracket assembly. We'll see what else comes my way.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Sorry guys... 5 week hiatus until I come back to Maryland. I will check in using the other forum sections though.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Score!!!!!
Just ordered a NOS seat to go with the brand new panels and gas tank!!!!!2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Forgot to add that the seat and tank have been discontinued for years!!!!
And yes... I have officially rounded $3000 for all these new parts.Last edited by cloudbreakmd; 06-21-2008, 02:15 PM.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
Originally posted by cloudbreakmd View PostForgot to add that the seat and tank have been discontinued for years!!!!
And yes... I have officially rounded $3000 for all these new parts.
Plus, have you looked at new bike prices these days? Putting a few grand into something you love is way better than pumping $20k in a new Harley.:-?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
New seat is fitted on bike
Time to upgrade the coils and fork springs... I would really like to keep black plug wires. Any suggestions before I double post?Last edited by cloudbreakmd; 07-28-2008, 11:50 AM.2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
2010 Honda VFR1200F
1983 Suzuki GS750T (sold)
Being Revisited
1981 Honda CM400T
http://www.bikepics.com/members/cloudbreakmd/
Comment
-
emeraldcoupe
are those the stock handle bars? i have an 81 550t and hate my stock bars, much different than yours.
btw, very nice bike!
Comment
Comment