The items included in the schematic are:
·Fuse box (stock GS)
·Ignition switch (2 wire after-market)
· Kill switch and Starter switch (button) (OEM)
·Starter
·Starter Solenoid
·550 Igniter
·Coils
·Stator
·R/R (5 wire)
·Frame grounds
·Ignition Kill Switch
Some Notes:
- There are no lights/blinkers included in the schematic. Obviously they should be added.
- No gages? You can add a wires for the coil (-) for the electronic tach, lights. (I left a ground in the harness running from front to back)
- This could be modified easily for a Coil relay mod. This would be simple to do now. (I left it out)
- There is an extra ground wire because some people may not have the starter solenoid and R/R mounted on the same plate. If you relocate igniter, solenoid, R/R to the same plate then things get simpler. Just make sure the Star grounding configuration at the R/R is maintained.
- Any other accessories can be added to the extra circuits shown
The pdf file was created in Powerpoint so if someone wants that powerpoint file (PM me) they can change the colors of the wires for any other color sets they might want. The pdf of the version using stock colors is below.
The various symbols came right off the 550 schematic so if you study that and this you should be able to make decisions with respect to reusing old connectors or just wiring directly. Anything not connected is obviously not being used.
EDIT: THIS IS BAD LINK:
http://www.mtsac.edu/~cliff/storage/..._Schematic.pdf
A little discussion on lighting
Comment