Announcement
Collapse
No announcement yet.
GSXR "DOT" head on my GS1100
Collapse
X
-
Originally posted by Blower View PostInteresting project!
I will do slightly similar modification, but with modified Bandit 1200 cylinder block, extra oil pump for head cooling and oil drain pipes from cylinder head to the engine block.
Engine bottom is from 1984 GS1150. Most difficult thing will be extra oil pump, but I have a idea how to install it in the oil sump.Paul
sigpic
Comment
-
Originally posted by Blower View PostDid you had any issues about the cylinder stud length? I using original GS1150 cylinder studs and all of them are about 10 - 12mm too long.
I made 10 and 12 mm long "washers" from aluminum to fix that problem.Paul
sigpic
Comment
-
Yes, the full story is on oldskoolsuzuki.info.
It was a little bit over one year project.
It's using GSX1100F cylinder block bored to gen1 Hayabusa pistons, so engine is 1360cc. Camshafts are regrinded, RS38 Mikunis, head ported and a lot of special parts.
I hope to see your project ready and running.
- Likes 2
Comment
Comment