Announcement
Collapse
No announcement yet.
Gs1000s
Collapse
X
-
347yoshi
-
347yoshi
-
russr33
Comment
-
Very impressive, well done!1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
gs road racer
Very nice!!! The red is great too I like the blue better , cause mine's blue!Wish they had imported the red into NA we only had the blue ones...
Comment
-
347yoshi
-
347yoshi
-
347yoshi
Went to fit my new petcock only to find it don't fit, I have 50mm holes in the tank and the petcock is 44mm damm what where Suzuki on.???.
Comment
-
Originally posted by 347yoshi View PostWent to fit my new petcock only to find it don't fit, I have 50mm holes in the tank and the petcock is 44mm damm what where Suzuki on.???.79 GS1000S
79 GS1000S (another one)
80 GSX750
80 GS550
80 CB650 cafe racer
75 PC50 - the one with OHV and pedals...
75 TS100 - being ridden (suicidally) by my father
Comment
-
347yoshi
Had it running but clutch rattling at tick over stripped it down hoping to find loose springs, but basket has had the the springs spaced out so no movement? rebuilt it but noise still there pull clutch in and it goes away,I have another basket I might put a set of APE duty springs in and see if that helps.also the starter was making odd noise every so often but the starter clutch seem's fine other than that it runs sweet.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
For some reason the chain drive 1000 clutch hubs almost always rattle. Even on the one where I shimmed the springs it still makes some noise. I recommend one of those heavy duty back plate and spring kits. Starter noise could be starter clutch related. Did you change out the rollers and springs? Might be worth a look.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
347yoshi
-
russr33
Comment