Announcement

Collapse
No announcement yet.

Gs1000g conversion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gs1000g conversion

    Can one fit GS850G cylinders to a GS1000G motor and rebore the 850 sleeves to a second oversize that is 70mm which would then be a standard size for the 1000, could this work.Has anyone tried it before?

    I know there is a differrence in the stroke (4mm) could one work past this.

    #2
    You should probably post this in the tech section.

    Comment


      #3
      the wrist pins are different size between 850 and 1000
      GS850GT

      Comment


        #4
        You can put the 850 top end on a 750, not a 1000 as stated wrist pins are different

        Comment


          #5
          what are you actually trying to achieve, better performance or just a repair of sorts?
          GS850GT

          Comment

          Working...
          X