Announcement

Collapse
No announcement yet.

swapping gs1100g swingarm /wheel into gs1000g frame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    swapping gs1100g swingarm /wheel into gs1000g frame

    I am putting an 1100g motor into a gs1000g frame and would like to use the swingarm and rear wheel brakes etc off the 1100g as well.
    It seems the 1100g swingarm should fit although it is 5mm narrower in measurement at the pivot arm bearing end to bearing end.
    Does that matter or can the difference be taken up by tightening the bearings.

    Would appreciate some expert advice.
    Thanks
Working...
X