I've invested a lot of time into her, as I bought her as a non-runner in fairly rough shape... almost 40K on the clock.
She's sporting a Dynojet stage 3 jet kit, K&N pods & a 4-1 pipe, I've honed the cylinders, new valve stem oil seals & lapped the valves. She starts almost the instant you touch the starter button - runs very well, pulls like a train (thanks to Chef's carb setting advice).
Here's list of the major work I've done on her:
Installed 4 K&N pod filters & autozone (k&n knockoff) valve cover breather filter
Rebuilt cam chain tensioner with new OEM seal, o-ring & spring
New stator cover gasket
New front fork seals & rebuilt fork dampeners
Replaced seals in tach drive assy in valve cover
Installed new aftermarket (Z1) half-moons cam plugs
New steerring stem bearings & races, top & bottom (All-balls set)
Coated fuel tank with POR-15, new OEM petcock
New Shinko 230 Tour Master tires front & rear
Honed clyinders, installed new rings (stock size)
Lapped valves, replaced valve stem oil seals
New OEM base gasket & head gasket
Rebuilt both front & rear brake calipers
Rebuilt both front & rear master cylinders
New SS brake lines both front & rear
Dyna coils (3.0 ohmn) & dyna wires
New motion-pro clutch cable
New left & right handlebar levers (black)
Installed superbike handlebars
Replaced all engine covers/carb screws with SS allen heads
Mike
Comment