Announcement

Collapse
No announcement yet.

Wrong rotor???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Wrong rotor???

    Does anyone have a picture of the rotor from a Bandit rear wheel? I bought a rotor on Ebay & it doesn't fit. I'm using a stock Bandit swingarm with a gs hub & stock Bandit rotor & carrier. The new rotor is perfectly flat, I always thought the Bandit rotor was "dished".

    Paul
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    #2
    What model bandit rotor did you buy and what model bandit wheel are you using? Not all Bandits are created equal.

    Comment


      #3
      I bought a rotor that is for a 97-04 1200 Bandit & that is the wheel I have.
      80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

      Comment


        #4
        bandit/GSXR/RF900...large bikes.
        all the rear rotors are flat...no dish.

        Comment


          #5
          Maybe I have the spacers wrong? I have spacer, wheel, spacer, hanger & the caliper doesn't line up. hmmmmmm.
          80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

          Comment


            #6
            maybe..
            the rotor bolts right to the wheel..
            puzzles are fun

            Comment


              #7
              Well, something is definitely wrong. I'll take some pics tomorrow.

              Paul
              80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

              Comment

              Working...
              X