A Little Tinkerin', A Little Drinkerin'

OK, I just went back out to the shed for a look-see.

I think I've figured why it won't start. The tank is dry.
Always the last thing you check, eh?

That doesn't explain the weird cranking though.
I'll replace those warped fuses in the morning, fuel it up and see what I can get out of it.

Secondly..
Does that RR look like a stock unit to you guys?
3 yellow wires would say otherwise to me..

Well, today was a loss.
I spent an hour in the shed trying to get the pig to start.

A couple of interesting observations to make.
It showed signs of a flat battery even though the multimeter says the battery is kicking out 12.4. freshly charged and a relatively new battery that has been working every other time I tried to start it.

The bike turns over a lot easier with the choke on than off.

The 15amp fuse looks a little warped and a couple of the 10s are a bit suss too.
I'll change them out tomorrow and see if that makes a difference.

The small pot next to the fuse box.. Is that the starter relay?

It got warm after a bit of cranking..

Looks like I have a bit of searching/reading/head scratching to do.

[pete]

Jeeeze , I feel like a wanker .
Checked the numbers on my R/R and it's a Shindengen .
I was told that it comes up as a Honda part . (Probably does for all the other Jappers as well ) .
The number on mine is SH2?2-12 0.1 . Couldn't read the middle number . To old . (The label , not me) .

Pete , a beer is always well had .
We'll be heading DOWN the road . Can't be more specific than that I'm afraid . The plan prolly wont change much from that till after said beer (They'll be lights if we're riding though) . We tend to "left or right" when we get to the fork . Rarely any earlier . So if you happen to be up for a ride , it's done .

Cheers , Simon .

Going by what's on the list on BassCliff's site, I expect that would be a SH232-12... however it looks like Leigh and I will be taking a $16.00 gamble on a cheaper unit (at least I have already anyway)... if it works then yeehaa, if it doesn't then it was only $16.00 and I'll blame Leigh coz he pointed me to it

Looking like my situation has stabilised again, so everything still on track for the moment meaning a catch up and potentially a ride is likely to be on the cards

[simon kuether]

Jeeeze , I feel like a wanker .
Checked the numbers on my R/R and it's a Shindengen .
I was told that it comes up as a Honda part . (Probably does for all the other Jappers as well ) .
The number on mine is SH2?2-12 0.1 . Couldn't read the middle number . To old . (The label , not me) .

Pete , a beer is always well had .
We'll be heading DOWN the road . Can't be more specific than that I'm afraid . The plan prolly wont change much from that till after said beer (They'll be lights if we're riding though) . We tend to "left or right" when we get to the fork . Rarely any earlier . So if you happen to be up for a ride , it's done .

Cheers , Simon .

[pete]

Rattle Can Black is a perfectly acceptable subsitute in situations like this.

Don't think I didn't consider that very option

Rattle Can Black is a perfectly acceptable subsitute in situations like this.

[pete]

Hey Chuck, sadly no.
I haven't touched it for quite a few months.
Some major league crap (read : Life) got in the way.

But over the next month I will have it done and make the most of the coming summer.
I vow not to go through another summer looking sadly out of my car window as bikes go by.

I'm going to get it on the road basically as is then polish it off next winter.

Mate I know that feeling! I also want mine done for this summer... had the paint conversation today and it may just end up ok...

Hey Chuck, sadly no.
I haven't touched it for quite a few months.
Some major league crap (read : Life) got in the way.

But over the next month I will have it done and make the most of the coming summer.
I vow not to go through another summer looking sadly out of my car window as bikes go by.

I'm going to get it on the road basically as is then polish it off next winter.

[chuck hahn]

Is she all done and ready for the most recent pics?I saw the one in post 1 and i really like tha paint scheme.

Aah the local retail market.
Yeah, not much to work with there.

[pete]

No probs mate, just wish there was at least a few locally we could have a go at

Aah cool.
Thanks Pete, i'll look through BassCliff's list and Ebay.
See if I can't get one on the cheap.

If I can't find one then I'll get that part number off you thanks, Simon.
Cheers.

[pete]

The Shindengens are used on Hondas and Kwakas by the looks, tons on eBay US going by the list of compatible ones on BassCliff's site. Some dirt cheap (less than $US20), some way expensive...

And Simon, meeting up for a beer on your way through would be awesome actually, would definitely enjoy a meet and greet even if I can't go for the trip.

Given today's news it might be a meeting on four wheels for me, but if fortune smiles my way, I may even ride a bit with you depending which way you head...

[simon kuether]

I tried to put pi$$ , but it came out like this , **** .
Do you want me to see if I can get a part number off mine . Should fit your bike as well ?

Cheers , Simon .