Announcement

Collapse
No announcement yet.

New Bike Project!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by cyclefvr2 View Post
    is there water in the oil?
    look in the plug holes see what the pistons look like
    no valves are stuck open?
    look through the exhaust holes and see what the valves look like, the pipes have to be off for this


    do a lil work make sure there is nothing in the piston area!, just incase someon put a bolt or anything in 1 of them, to **** someone off, yea there are some pieces of $hit out there in this big ole world
    Nope No water in the oil!
    The Pistons look pretty black and carbon covered, as for the valves none on them look like there stuck open there all pretty level. I'm going to rip the exhaust off tomorrow and check what that looks like.
    Thanks for you reply man! ill snap a shot of what it looks like when i get the exhaust ripped of!

    Comment


      #32
      UPdate!

      Well today! Just as I was Taking the exhaust bolts off! lol A Buddy came over and i was going go show him what the problem was and I hit the starter Button and she Turned OVER!! WHOOT! the a couple nights before I spryed some liquid wrentch into the cylinders. So i guess it freed them up. there pretty black and carbon covered. whats the best way to clean the out? besides takin them out?
      Thanks!

      Comment


        #33
        Carbon in the exhaust ports is normal and won't hurt anything. I wouldn't worry about it.

        That earlier photo with the blue/red wire thingie is a switch for auto cancel turn signals - fits into the gauge cluster. Not sure of your bike had that feature or not but there you go.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #34
          Originally posted by Nessism View Post
          Carbon in the exhaust ports is normal and won't hurt anything. I wouldn't worry about it.

          That earlier photo with the blue/red wire thingie is a switch for auto cancel turn signals - fits into the gauge cluster. Not sure of your bike had that feature or not but there you go.
          Even if the cylinders have alot of carbon on em?


          Yea I pulled the Sensor out of the cluster all good i'm pretty sure it doesnt have the feature!
          now to just get a valve cover gasket and see if she'll start!
          Anyone know where i can get a Gasket set?

          Thanks

          Comment


            #35
            bumppppppp
            anybody!

            Comment

            Working...
            X