Announcement

Collapse
No announcement yet.

GS 550L Gets a make over

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by Redneck View Post
    Well rode her down today and got the inspection passed. Then rode down into Portsmouth and picked up my master cylinder rebuild kit. It is just so nice to be riding again.

    Paul
    Yeah, just makes it so worthwhile don't it? Just that feeling of freedom...
    1982 GS450E - The Wee Beastie
    1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

    sigpic

    450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

    Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

    Comment


      Little update. Finally got the carb thing figured out then was having trouble keeping her idleing. Took it down to the bike shop to have the Carbs synched and he had to adjust the timing and replace the points. But she runs like a demon now.... even took her up on the Interstate on the way home. Don't care for that ... sitting up like I do on this bike and with the wide grips I was getting buffetted around pretty good. I will stick to the side roads whenever possible. Keep riding guys.

      Paul

      Comment


        Glad to hear she's running well now Paul, always good to see things getting better and better

        You need to get a small screen if you need to do highway miles. I can't believe the difference my home made one makes and it's pretty tiny and unobtrusive.
        1982 GS450E - The Wee Beastie
        1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

        sigpic

        450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

        Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

        Comment


          Good job!! Way to finish strong.

          Comment

          Working...
          X