GS1100- "Project NimRod"- Shafty

[Hoosier Daddy]

Watching now, missed it in the beginning. Glad I caught up with it! I too am one with a liter up shafty cafe'...and wanted to provide two-up if the wifey wants to go along.(although mine's not a Suzuki).
The only concerns I have is the PVC pipe wallowing out with use and the fact that you have lowered the front tubes but not the rear. This changes the geometry and has been know to change the stability. To avoid this you want to lower the rear equal to the front. See if you can find some 1" shorter rear shocks.
Other than that, keep it up!
Oh and one more minor issue, it's a "Bum Stop" in Britain your butt is called your bum and the seat style is named because it stops your bum from sliding off the back. LOL

[Awall]

Thanks Hoosier. I will keep an eye on the shims but I don't believe they are going anywhere. They are tight and I also sanded the inside and outside so that they didn't have the glossy surface. The clip ons have bitten pretty well into them and still have about 1/8" left to tighten them up.

I do know that lowering the front end might require the rear end lowered. I am 6'1" and 260lbs right now. When I sit on the bike I make it squat a bit..haha. So once I'm road testing everything I will adjust the rear. Also the CB tank is slightly longer so the riding position shifts rearward by about an inch or so..however I am leaning forward due to the change in the handle bar location. I need to ride the thing and work suspension out for my build and ride style...can't wait.

I appreciate all the good comments and suggestions. Remember, if anyone needs any parts I now have two boxes of odds and ends that I've stripped off. PM me if your interested

[Awall]

Playing around with the paint program. I want a vintage look for my paint. I might go all white (maybe silver) with these type of stripes and framing in black. I want to continue the stripes through the bum stop and add a Suzuki madalion on the tank.

[Awall]

Worked on tail and headlight today. I decided to mount the tail light under the bum stop and cut a half hole instead of mounting it behind and outside the stop.

[Awall]

The tail light is actually a trailer light from advanced auto. I hope I am achieving an old school/vintage look and not to custom and hot rodish.

Played around alittle with the sharpie too. My black stripes will come down the center of the bum stop and I was playing with what I might do with them when they reach the tail light. I might just let them die and not do this type of design.

[Awall]

I need to find one more mounting point at the rear of the removable bum stop and cover everything in black vinyl. All I have to do to take my baby for a ride is remove the two allen screws on each side at the front of the bum stop and bam...more seat.

I used the camping mat foam for the base of the seat. That many layers doesn't compress a whole lot...even under my load. Hope it will be comfortable...though riding a cafe racer isn't supppost to be comfortable.

[TSCC]

I was one of the "its to nice to cut crowd"

I'm not picking on ya... However that's a Nice Bike you're going to cut up... If you become "One" with the bike, there's no need to throw it around. It will do what you tell it to.

Seriously man that is a very nice looking machine. Even for an L. Also being that big and being a shafty, it's gonna make a very awkward cafe. Some people here have Cafe'd the big bikes before, but they were far from pristine as yours is when they started cutting.

If it was my bike, and I wanted a cafe, I'd sell it and buy a GS1000 in slightly worse condition and then also have some extra cash for cafe goodies.

But it's not my bike. It's yours. You can cut it up if you like.

Looks good so far. Don't let the "it's to nice to cut up" crowd ruin it for you.

I think I was "Mis-Labeled" by Zipcode68147

If you read Awalls first line he explains it's his first Cafe project.

Having worked at a project shop I would never tell anyone to not cut a bike up, and to just be weary what you may encounter along the way.

I actually encouraged this customer to "Cut" this bike up. It was stock.

And Awall you're doing a Fine Job..

[Awall]

Thanks for the encouragement.

[Awall]

Step 2 of my tank cleaning: Added quart of sand and rock, quart of hot water and alittle degreaser. Shaking as much as I can. Hope this will work. It shouldn't take that long...rust isn't bad. Will rinse and repeat until clean. Couple more steps to complete bum stop. Will post more pics tomorrow.

[Awall]

First session with the sand mixture...good to go. Going to do it all day tomorrow for good measure. All the water from the tank came out rust color. The back bone in the tank is what is hardest to get, so I'll concentrate on that with this next batch. Sides and top are rust free.

Btw... I used some jb weld over the emblem mounting strips on each side of the tank to create a solid surface for bond as I have indented them to hide. I have a few dents to cover aswell.

[Awall]

So today I mounted two flat steel cross members in the frame below the seat area. One was mounted approx. 2 inches forward of the cut off points on the tail. I plan to slot the forward support (above battery box) to accept bolt heads screwed into bottom of the seat pan. Then holes in the rear cross member for bolts.

Tank received skim coats of bondo.

Started the switch mounting plate for power and start switches. Using a thin aluminum plate and am still looking for location.

[Hoosier Daddy]

I have often thought about buying an old gallon paint can shaker / mixxer from a Hardware store thats going out of business. Then use it to put old tanks in the clamps after pouring in some light oil an B-B's.... "Just set it and forget it" for about an hour.

[Octain]

I have often thought about buying an old gallon paint can shaker / mixxer from a Hardware store thats going out of business. Then use it to put old tanks in the clamps after pouring in some light oil an B-B's.... "Just set it and forget it" for about an hour.

Na, just duct tape it to the drive wheel on a lifted car/truck, put in gear and let here spin.

[Awall]

Nyce! Yeah..I got a good ab workout shaking that tank all evening. I thought it would be nice to have a paint shaker for this. I put the tank on top of my "out of balance" washing machine...but it balanced it out and it wouldn't shake...haha.

[Awall]

I decided that the first round of shaking was good enough. The back bone of the tank only has some slight rust coloration here and there...not raised rust.