Announcement

Collapse
No announcement yet.

Project:Old Yeller on the road

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts


    Even better in the daylight Pete


    Got some vinyl and fabric paint to redo the grab rail mounts and did the triple cover with it to.The metal piece of the rail was done with appliance epoxy.Should have done them the first time round

    Comment


      She's looking great Greg! I like how neatly that voltage display fits in too...
      1982 GS450E - The Wee Beastie
      1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

      sigpic

      450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

      Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

      Comment


        Finally after far to long SHE RUNS!!!!Took a bit of cranking with the new AGM battery and and trying to bump start it down the hill here.It started with the electric while we where taking a break pushing it back up the hillFeels good to hear it after so long.Do have an issue with the tach,it won't read anything over 2000 RPM.If it doesn't fix itself I guess it's a trip into it's guts.Electronic so it's not a cable issueInsurance goes on tomorrow (Friday) and hopefully I will get to ride soon instead of talking about it!

        Comment


          Great news Greg!
          1982 GS450E - The Wee Beastie
          1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

          sigpic

          450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

          Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

          Comment


            Thanks Pete it's great to be on the road again!Runs real sweet to.Had some "issues" but nothing serious.The new chain really makes a big improvement on smoothness.Plugged in the heated vest this morning and the new stator kept right up to it.I'm even more happy with it now!

            Comment


              Where at Kenco to pick up a darker flip screen I ordered for the EXO500 .The wife asked if Ken could get the K&S repro signals I've had my eye on at Part N' More.The answer is yes he can at a very good price toSaves us a TON of hassles.Thirty plus years of UV does a number on the rubber pieces on them.Doubt I could find a a used set in any decent condition for less.

              Comment




                Went this morning for some beauty shots.


                Can't imagine why I need new ones.

                Could have gotten the longer stocked ones but....

                I think these shorter versions look WAY better!

                Comment


                  They definitely do. Guess it's time for the first aesthetic upgrade on my 1150!

                  Comment


                    These J&S repro's really are quite good,slotted right into the OEM spots and the wires where long enough to fit.Happy we could get them.Have the fronts to,just have to wait for the next payday to get them

                    Comment


                      Can't tell they're not stock.

                      Comment


                        Sure do
                        Did a valve adjust.Tried it the way it says in the manual,it's WAY better than what I was doing.I forgot to post it here but I took the instrument pod off,got all the guts out.Fiddled with the tach and it works now.Putting it back together I did this

                        Comment


                          Have had a small oil leak for a while,just a few drips every ride.Till I got it back on the road,it started dripping a lot more(by my standards).I thought it was the gear indicator sensor.No it turned out to be the clutch push rod seal.Looked it up in the Parts Outlaw fiche and said to my self "That's what that thing is".Searched a bit and found it,fortunately it was better than the one in the bike.Put it in and when for a good tear(by my standards) with a friend.Not one drop

                          Comment


                            The old seal I put in leaked as bad as the one in the bike.Ordered a new one from the closest stealership,wasn't even to badly priced.Thought I might need a new stator cover gasket to as I have a leak there to.Looked at bottom bolt to see it wasn't clamping down Pull it out and it's WAY to longSlipped a shorter one in,hoping my leaks are done.

                            Comment


                              A lesson on why you need to take brake parts apart and clean them.My rear brake was coming on without me pushing the pedal.Wasn't obvious what was happening at first but it was gradually it got worse,to the point I couldn't push the bike myself.Could go back a bit later and all would be good.Took off the MC and once I removed the reservoir port I seen the problem.A blob of stuff was sitting over the return port.It was fluid enough to clog it intermittentlyThe circlip on that MC was to rusted to come out so I pulled one out of the stash,took it apart and put it in the ultrasonic for a cycle.Got my instrument glass from Joe Whellan toOn oil leaks either.

                              Comment


                                I got some extra discs for the Supertrapp,CMSS had 6 at a good price and very reasonable shipping.Put all 6 in and it's just a little loud but the trade off is it really fells alot more uncorked with 15 discs.

                                Comment

                                Working...
                                X