Announcement

Collapse
No announcement yet.

First ever bike rehab attempt: 1980 GS550

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    First ever bike rehab attempt: 1980 GS550

    Hey,

    A friend recommended I start posting here for help on a new project. I recently bought a 1980 GS550--though it might be a GS500. You guys tell me:



    Anyhow--so I've got this bike and it doesn't work. I have never set a wrench to a bike before but I'm eager to learn. Have always wanted to do something like this. I'm hoping you all can help me along the way and I will post updates and whatnot.

    First things. What I believe to be the crankcase cover (please forgive my present and ongoing ignorance) has a serious crack. It's only on the outside piece that appears to be replaceable--yay or nay?:



    Beyond that, I think first steps are to clean the hell out of everything. Anyone recommend anything in particular for the chrome/engine block? Yes, it's true, I don't even know how to properly clean a corroded old bike. Next is a new battery. I really don't know what state it's in (I'm told it has compression), but I'd like to get it running and than maybe convert to a cafe racer.

    Anyhow, any advice/thoughts would be very much appreciated on this, my opening post on the GS Forums.

    Thanks folks.

    Brian

    #2
    It's a 550L, it is perfect for the cafe conversion. I am parting one out just like it, should have that cover and anything else you may need. Get a list together and send a PM.
    Should be a nice bike again one day, and all the information you could possibly ever need is in Cliff's welcome which you will see here soon. Welcome to the madhouse that is the GSR.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      crack?break lol best of luck ill help how i can. if you want to cleanthe engine oven cleaner+old tooth brush=success but if you dont get all the cleaner off it will turn white and look how it looks now so i would follow the scrubbin with a can of carb cleaner then spray it off with compressed air if you have an air compressor

      Comment


        #4
        Oven cleaner is super harsh. I wouldn't ever use that stuff on my bike. Simple Green or some Gunk spray degreaser works fine.

        As far as that broken cover is concern, I suggest you remove it and look to see if the crankcase is cracked too.

        Good luck with your project

        BTW, please check this thread to see some common issues people not familiar with wrenching on a GS may experience... http://www.thegsresources.com/_forum...d.php?t=171846
        Last edited by Nessism; 05-14-2011, 09:24 PM.
        Ed

        To measure is to know.

        Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

        Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

        Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

        KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

        Comment


          #5
          Thanks, gents. I will be posting again and PM'ing part needs soon. I have no idea what I'm looking at, so this is gonna be messy...but tons of fun, I hope.

          Comment


            #6
            What kind of battery does this thing take? Research tells me YB10L-A2. In the bike now is a 12A-A. Which is correct? Also, according to Autozone, the battery will cost $50. I know that's absurd--where else should I check?

            Comment


              #7
              Walmart, Batteries Plus, your local bike shop (where I get mine)
              Cowboy Up or Quit. - Run Free Lou and Rest in Peace

              1981 GS550T - My First
              1981 GS550L - My Eldest Daughter's - Now Sold
              2007 GSF1250SA Bandit - My touring bike

              Sit tall in the saddle Hold your head up high
              Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
              and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

              Comment


                #8
                Also, where can I fine this welcome from Cliff that was mentioned?

                The thread for newbie GS wrenchers is very helpful for process. Thanks!

                Comment


                  #9
                  He'll come along later but for now his site is: http://members.dslextreme.com/users/bikecliff/
                  Cowboy Up or Quit. - Run Free Lou and Rest in Peace

                  1981 GS550T - My First
                  1981 GS550L - My Eldest Daughter's - Now Sold
                  2007 GSF1250SA Bandit - My touring bike

                  Sit tall in the saddle Hold your head up high
                  Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
                  and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

                  Comment


                    #10
                    Heh. Looks like somebody thought the stock L bars weren't high enough already

                    That's your ignition cover that is broken. The cover and gasket are to keep moisture out more than to keep anything in - it's nothing that in and of itself would stop the bike from running.

                    $35-40 seems about the going rate for a plain 'ol battery in a store. Can't comment on the size as mine never had the battery box under my ownership and came fitted with a 14 size batt. However, if you're planning to keep the bike for more than a year or two you might just consider an AGM type battery. They're more expensive but are maintenance-free and have a reputation for longer lives. Seen starting at $55 or so online: more in stores as you would expect.

                    Comment


                      #11
                      Hi Mr. bsullivan,

                      Sorry I'm late to the party. This isn't one of the sections I frequent so I've missed your first few posts. Normally an introductory post in the "GS Owners" section will get a "mega-welcome" form me right away.

                      Anyway, let me dump a TON if information on you and share some GS lovin'.

                      I just stopped by to welcome you to the forum in my own, special way.

                      If there's anything you'd like to know about the Suzuki GS model bikes, and most others actually, you've come to the right place. There's a lot of knowledge and experience here in the community. Come on in and let me say "HOoooowwwDY!"....

                      Here is your very own magical, mystical, mythical, mind-expanding "mega-welcome". Please take notice of the "Top 10 Common Issues", "Top 15 Tips For GS Happiness", the Carb Rebuild Series, and the Stator Papers. All of these tasks must be addressed in order to have a safe, reliable machine. Now let me roll out the welcome mat for you...



                      Please click here for your mega-welcome, chock full of tips, suggestions, links to vendors, and other information. Then feel free to visit my little BikeCliff website where I've been collecting the wisdom of this generous community. Don't forget, we like pictures! Not you, your bike!

                      Thanks for joining us. Keep us informed.

                      Thank you for your indulgence,

                      BassCliff

                      Comment


                        #12
                        Cliff,

                        You are a gentleman and a scholar. Thank you for the mega welcome and all of the tips/information that comes with it. As a wrenching newbie, this site and its members will be of the utmost importance to me. I will keep this thread updated with pictures and the like as my work on the bike slowly progresses.

                        Thank you!

                        Brian

                        Comment


                          #13
                          Originally posted by bsullivan View Post
                          Thanks, gents. I will be posting again and PM'ing part needs soon. I have no idea what I'm looking at, so this is gonna be messy...but tons of fun, I hope.
                          yes, tons of fun.... until you take off one part to reveal a worn out this, or a broken that..... and simple green and scrubbing.... and gunk engine degreaser and tryin to "make " a special tool to clean a certain crevice. and 20 more dollars for more purple power cleaner and more PB Blaster. Then you start to get a "vision " of what you are tryin to do with the bike, and then THIS certain part is not good enough, and THAT part is the one I must have....and holy crap, i have been polishing and painting parts for six hours and that was just one wheel and a few other lil things. then you start painting bolts, cause they are rusty and look like ****, but ya gotta getem shiny with a wire wheel first... then primer,,,, then paint.... then you obsess that the paint will crack on em when you torque em down, so you better bake the paint...... ha ha ha ha (BUT I WOULD NOT HAVE IT ANY OTHER WAY!!!) I am enjoying my rebuild quite a bit, and as I near having fully stripped, painted and polished rolling chassis again, I am a step closer to realizing I am making a bike that is all mine and I dreamed up. It is not a super perfect rebuild, but I am getting some pretty good results. Pretty cool. Cant wait to ride it already..... good luck, best wishes.. Its a beautiful obsession.....

                          Comment


                            #14
                            So I finally had two hours to set up my garage and start poking around the bike. Next weekend will probably see the carb cleaning (gonna order new o-rings from the recommended source here). Two issues. New petcock required?



                            And I haven't tried rinsing this sucker out yet, but from the looks of it, this tank is going to need a thorough cleaning, for which I will need lessons:

                            Comment


                              #15
                              Also, one of my rubber front tank mounts is missing.

                              Comment

                              Working...
                              X