A skunk in the works

Ordered up the new brake lines from Rennsport.Ditching the CB project and sending out parts has left me a balance in my Paypal

Local place was double what Rennsport will do then for Eric.My post was not very clear.Yes GK I did send to there.they have double banjos to,about $7 IIRC.I'm getting a new double incuded in that price.

OK. It sounded like they cost less than Rennsport.
I was going to ask for a link.
I'll stick to Rennsport then.
They had no problem making one line longer at no extra charge or any time delay either.

Eric

NIIIICE Greg, NIIIIICE, looking good, I like it, I like it a lot......

And Rennsport is a deal!
WOW!!!!


Eric

Local place was double what Rennsport will do then for Eric.My post was not very clear.Yes GK I did send to there.they have double banjos to,about $7 IIRC.I'm getting a new double incuded in that price.

[pete]

Wooohooo Greg! You got a roller!

And yes, +1 on Rennsport, it was cheaper for me to get mine shipped from there than buy it locally...

approximately 20 bucks a line, new crush washers and banjo bolts (single only/not double) and shipped

bolt them on and add your fluid.....

I certainly thought it was a good deal, and I actually think SVSooke pointed them out to me...Thanks buddy....

And Rennsport is a deal!
WOW!!!!


Eric

Even better now that I got the calipers sorted.Fender's on finger tight for now.Got to get on the wiring next.Next to buy is the SS brake lines.Went to the local place that does them,even with shipping from Ontario they are 1/2 the price at Rennsport

Looking a lot like a bike now. It is going to be sweet!

Eric

Oh yea, looking sweeeeeeeeet

Spacers are still giving me grief http://www.thegsresources.com/_forum...d.php?t=193788 .

Think she looks pretty good on my wheels

Got the wheels on the bike tonight.Front was a but of trouble.One of the spacers would not go in the right way.There as a burr in it.Finally found a rat tail and got it out.Pics in the sun tomorrow.

Thank you Bill and Eric.There are 2 sign places locally so I should be able to get 1 to help with this.
Fixed 1 of Saturdays boo boos

Did NOT put air in the tubes then lever on the tires.Much better with no holes in the tubes

Looking very fine indeed.




Eric

[Bill Alexander]

OK here's the plan.The seat trim and tail are fine so I will just need to redo the tank.That is under way.Have to find some decal material.That stuff seems hard to get here.Recommendations on where I might look?None of the automotive places here seem to carry any.

I got my decals and pin striping from a vinyl letter cutting place. They did some sign writing on one of my cars for me so I figured the materials they use would be suitable for the bike. I sent them a scan of the decal and they cut it in white vinyl and for the pin stripes they just cut me 3mm strips in the required colour (gold and black).
This photo not the greatest quality but should give the idea.