82 GS1100E Project/Cleanup

[Guest]

Just getting started on the bike and hope to have it running soon. Looks like I'll have to clean up the wiring and the head gasket is leaking a little. I'm putting the motor back together in my car also so this will be a little slow going. Snapped a few pictures before I really get into things.....on to the picture's.

This is what it looked like starting


Begining the tear down

[wacky941]

You weren't kidding, it does look like the twin! Nice score!
What's the condition of the tank? Mine is shot but thats okay it wouldn't be fun if it was easy


If you decide you don't want those case guards, let me know I might be interested.

[Tech73]

Finished cleaning the carbs but now have to find O-ring's and bowl gaskets before they go back on.

What they looked like starting off






Now good and clean

[bonanzadave]

Nice project. Kudos for bringing her back .

Welcome to the EZ Boyez Club.

[Tech73]

You weren't kidding, it does look like the twin! Nice score!
What's the condition of the tank? Mine is shot but thats okay it wouldn't be fun if it was easy


If you decide you don't want those case guards, let me know I might be interested.

I haven't really looked in the tank yet. I'm going to keep my fingers crossed before looking.

I've thought about taking them off then thought, I'll leave them on for now. If I do take the guard's off I'll let you know.

[Flaming Chainsaws]

I'm in for the ride on this one .

[wacky941]

Any updates?

[Tech73]

I haven't had the time to do much yet. Waiting on my days off to do the most. I did take some parts off. Trying to make up my mind on whether or not I'll pull the engine.


I'm guessing stock coils


Lot of oil coming out of that head


Motor looks to be pretty nasty inside


Going to sand these down and repaint them


New wiring harness anyone?

[saffa]

Motor looks to be pretty nasty inside

another 100 000 miles left in her at least

[Tech73]

I've tried looking through search to see if the 82 and 83 GS1100E is the same frame but can't find any info. I'm sure one of you guys can tell me.

Thanks

[Flaming Chainsaws]

I've tried looking through search to see if the 82 and 83 GS1100E is the same frame but can't find any info. I'm sure one of you guys can tell me.

Thanks

I'm pretty sure that the '82 and '83 GS1100E are the same bike, except that the '83 has some upgraded parts.

[mriddle]

I've tried looking through search to see if the 82 and 83 GS1100E is the same frame but can't find any info. I'm sure one of you guys can tell me.

Thanks

What exactly makes you ask ?

I think they are very nearly the same if not exactly.

[Tech73]

I'm pretty sure that the '82 and '83 GS1100E are the same bike, except that the '83 has some upgraded parts.

Thanks FC, I've been looking at the foot pegs on the 83 and like them alot more than the ones on the 82.

I have the whole back taken a part and cleaning the tire and other rear parts. It's my two days off so going to get as much done as I can.

[Jason the terminator]

The difference between the 82 frame and 83 is the foot pegs. The passenger will fit if you make spacers but the fronts will not fit.

[Tech73]

The difference between the 82 frame and 83 is the foot pegs. The passenger will fit if you make spacers but the fronts will not fit.

That's what I was thinking, I was looking and compairing pictures of the foot peg area and it did look different. I see where the 82 the swing arm bolt goes through the rear foot peg mounting plate and the 83 doesn't. I guess I'm forced to just keep the 82's on it. Thanks for the answer.