De-stinking Penelope

[pete]

Allrighty then, that settles it, the good stuff goes on Penelope.

I went shopping today and picked up some modeling paint for the ends of the indicator needles. I think it looks like a very close match to what should be the original color on the needles.

In my opinion, the best way to apply the new paint to the tip is to lightly scrape the old tip colour off with a razor blade, then dip the tip of the needle into the jar of paint, remove and let hang with the tip pointing down until its dry. dipping the tip into the paint instead of applying it with a brush will leave the tip perfectly smooth looking just like it came from the factory.

Now *that's* what I call attention to detail... bravo Dale, I applaud your thoroughness

[rustybronco]

Pete, I spent 30 minutes deciding which colours were best to use. I even walked around the store with various shades of paint drying on the finger tip of one hand while the tach was in my pocket. when I got home I dipped that spare needle into the paint and my Wife asked, 'is that all you bought that for?' yep...

[pete]

Pete, I spent 30 minutes deciding which colours were best to use. I even walked around the store with various shades of paint drying on the finger tip of one hand while the tach was in my pocket. when I got home I dipped that spare needle into the paint and my Wife asked, 'is that all you bought that for?' yep...

Hahaha nice Dale... bet you got some strange looks in the store too right? I spent a while wandering around Supercheap and Woolworths today trying to find the right size bag for my tools to go on the tool tray in the tail piece with no joy.

I reckon I'll also get some funny looks if I need to take them out as my wife gave me one of her old coin purse type things... embarrassingly enough it's an absolute perfect fit in there...

[rustybronco]

Pete, I've long since cared if people think I'm in my right mind or not. it's my music, I'll march to it.

If you feel you'll be embarrassed whipping out the Wife's old coin purse, stitch one up out of vinyl or leather that I'll fit in the tail piece. if it were me personally, I'd care less what people think of using it. kind of similar to if you choose to ride a 125 or a 1200, it's none of their concern.

[pete]

Pete, I've long since cared if people think I'm in my right mind or not. it's my music, I'll march to it.

If you feel you'll be embarrassed whipping out the Wife's old coin purse, stitch one up out of vinyl or leather that I'll fit in the tail piece. if it were me personally, I'd care less what people think of using it. kind of similar to if you choose to ride a 125 or a 1200, it's none of their concern.

Yeah I get ya Dale... I'm mostly over that stuff myself... however if I was to stitch one up I reckon the result of that would be even more embarrassing... (I failed sewing in high school... big time)

[rustybronco]

Pete, all you need is a desire to learn and the right teacher.


One gauge is completed.

I had to convert the 1000C speedo to a 1000E style gauge by adding the speed sensor (reed switch). a bit easier to say than it is to do, especially when the E gauge I took the parts from was damaged. I even repainted the needle

notice the mileage? 00000.8 just like the NOS gauges. I thought that would be a nice touch!

[rustybronco]

Tach has been taken apart, the lens cleaned and the needles repainted..

I hand painted the oil-p on a spare gauge housing to see how well that method will look.

[Flyboy]

My donner, "like new" is an under statement, Dale, your attention to detail never ceases to amaze me. I am thinking I need to strip Jennifer to the frame and start again, she looks like a beater compared to what is going on there.

[sedelen]

Pete, all you need is a desire to learn and the right teacher.


One gauge is completed.

I had to convert the 1000C speedo to a 1000E style gauge by adding the speed sensor (reed switch). a bit easier to say than it is to do, especially when the E gauge I took the parts from was damaged. I even repainted the needle

notice the mileage? 00000.8 just like the NOS gauges. I thought that would be a nice touch!

After looking at the guts to these, I now know why they call them "clocks"
Dale, you should've been a surgeon. "Kids, don't try this at home!"
I don't think mine would've worked had I taken them down that far.

[rustybronco]

Steve, I'm willing to bet after you had studied them for a while, you could have taken them down that far and gotten them back together properly. the hardest part is un-crimping and re-crimping the bezel so it doesn't look like some 'hack' worked on them, the rest is 'fairly' easy. (it also helps when you work on clocks as a hobby... )

[rustybronco]

I am thinking I need to strip Jennifer to the frame and start again, she looks like a beater compared to what is going on there.

Stan, as I've said before, that song won't play very well in Peoria. http://en.wikipedia.org/wiki/Will_it_play_in_Peoria%3F

your kidding 'Nooone' here.

[Flyboy]

No, seriously man, your work is top class, and I pick my photo angles with care.

(it also helps when you work on clocks as a hobby... )

That is interesting, a good friend of mine who now lives on your side of the pond in Boca, collects clocks as a hobby, Carriage clocks and Grand Father clocks mostly, but all kinds really.
When he packed up to move over there, his collection filled a 12ft container, on its own.

[brslk]

Nice but tearing apart clocks is like voodoo to me.

Bruce.

[pete]

Dale, you never cease to amaze me... that is awesome!

My shakey hands would never cope with such delicate work, I'm lucky enough to be able to hold a soldering iron steady enough to get a half decent job...

And yes, I get ya on the sewing thing... in fact I need to sew up the end of the zipper on my tank bag that came adrift on the GSR run, guess I should probably do that soon...

[rustybronco]

I wish you could see them in person

As they really look that nice!

I even cut off the old wiring sheath and replaced it with one in much better condition.
okay, so I'm a nut job...