suzuki gs850 gn project

[karl1989]

found some pitures on my laptop so thought i would put these on till we get some more up-dates



my dad in the back ground having to turn the ignition on by a switch on the side panel thanks to a previous owner witch has done another bodge job


all comments welcome. the front lights are coming off by the way

[karl1989]

well went to my dads to do abit with the bike. this is how it stands at the moment.




also may aswell get some more carbs. the previous owners has painted them and used nuts and bolts to hold the bottoms on. also need some jets

this is bent some how


and this one has snapped but not sure if it can be changed


also had to scrape the rest of the bodge gasket of. heres another pick of the snapped jet.

[Big T]

That's not a jet, it's a fuel pick up tube (the last picture)

It can be soldered, or you can look for a new carb body

I don't know how anyone bends the main jet holder

Remove all the parts (especially those fuel screws up front) and dip the carbs

[karl1989]

That's not a jet, it's a fuel pick up tube (the last picture)

It can be soldered, or you can look for a new carb body

I don't know how anyone bends the main jet holder

Remove all the parts (especially those fuel screws up front) and dip the carbs

the fuel pick up tube will this cause it to not to run right.

the main jet we was the same. complete tool who had it.

also in the carbs bowls there is 2 holes either side of the main jet. 1 hole is open and the other one seems to be blocked with something of a gold colour. is it meant to be like this?

thankyou for your help