Announcement

Collapse
No announcement yet.

Mike R's GS550/650 bare bones street racer

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Looking good. I love the oil cooler lines.

    Comment


      Sick bike man, I don't even wanna know how much you got in parts alone on this thing.

      I bought that same exhaust for my 550 it sounds sick and I don't even have the carbs dialed in yet.

      Comment


        I've taken the bike out on 2-3 nice rides. The wideband has been awesome. I have the bike running pretty good. I need to just sink the carbs and adjust my valves before doing a finaly carb tune. I'm running a bit rich at idle which I should be able to tune out with the idle mix screws. WOT is running on the lean side but making great power. I'll probably bump up a couple sizes on the main jet and then fine tune the bottom end/ idle.

        The bike rips so far and I know it has more in it. As of now I have alot of parts zip tied in place so I could get some seat time and test/tune the bike. I will get some videos and newer pics up shortly.
        1978 GS550 E
        673cc swap / the hot rod

        2013 GSXR
        New daily rider

        2012 RMZ450
        for playing in the dirt

        Comment


          Update Time: I made a small bracket for the oil cooler lines to keep them from hitting my pipes. Replaced the Main jets up to 130s from 110 ands that seemed to be almost perfect. A bit on the rich side but it's also been humid and near 100 while I've been testing. The bike is ripping and pulling hard all the way up til 10500 rpms. I'd probably go further but I'm not sure how much more she can take. The gearing works great with the power. I could probably go up a tooth in the front and still retain the same pull with a little more topend but I topped out the bike and I don't think I'd want to go much faster due to stability ( est 115-20ish).

          I'm going to try and get some riding video, which shouldnt be hard considering I'll be riding it alot now that the jetting is good. It still has a slight oil leak where I had the front center head pinch bolt break ( I really need to pull the head UGH too much work.) I've just been going over the bike retightening things and tweaking here and there. Really could use a solid valve adjust, carb sync, timing check to get it up to tip top spec.

          I have a new seat coming so I'm going to work on getting the bike 100% together.My goal is to work out the bugs over the summer and fall and do a a tear down and paint/polish/dial in over the winter.
          1978 GS550 E
          673cc swap / the hot rod

          2013 GSXR
          New daily rider

          2012 RMZ450
          for playing in the dirt

          Comment


            Impressive work mike. Keep going with it and good luck.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment


              Can't decide which way I like the new seat better, with the tail piece or without.



              1978 GS550 E
              673cc swap / the hot rod

              2013 GSXR
              New daily rider

              2012 RMZ450
              for playing in the dirt

              Comment


                Very nice build !

                I prefer the way the tail piece ends the line of the tank and seat, find it makes more sense with the age of the bike too.

                Comment


                  Wow, this thing looks awesome! Great work on the build so far, can't wait to see the finished bike.

                  I think the tailpiece looks better on, it finishes the lines of the bike really nicely. Are you gonna move the tail-light up into the tail or leave it down my the swingarm? Personally I think it would look better in the tail piece, but thats just me.

                  Keep up the great build.

                  Comment


                    Originally posted by Tim Tom View Post
                    Wow, this thing looks awesome! Great work on the build so far, can't wait to see the finished bike.

                    I think the tailpiece looks better on, it finishes the lines of the bike really nicely. Are you gonna move the tail-light up into the tail or leave it down my the swingarm? Personally I think it would look better in the tail piece, but thats just me.

                    Keep up the great build.
                    Tail light isnt mounted there. If you look a little closer thats my wonderful test ride seat seatup with the plate and tail light ziptied to the back of the seat. I will be doing a taillight under the rear cowl. Still need to sort out plate mounting position.

                    Thanks for the compliments. It's constantly evolving and when I'm finally satisfied it's going to get torn down to frame and painted.
                    1978 GS550 E
                    673cc swap / the hot rod

                    2013 GSXR
                    New daily rider

                    2012 RMZ450
                    for playing in the dirt

                    Comment


                      Can you tell me how wide that swingarm is at the pivot?

                      Comment


                        i love this! anybody think i could put a gsxr 650 front end on a GS650G?
                        Boontonmike i sent you a message with a few questions btw haha im starting alittle project myself

                        Comment


                          with, and paint it to match your front wheel.

                          Comment


                            gs550/650 swap

                            Great thread. And yes i have a stupid ?, Is or is not the 81/82 550 block the same as the 81/82 650E, 81/82 550 have the clutch cable tang on the block.If so would it be easier to swap top end? thanks. SAN

                            Comment


                              you can put a gsx650f front end on it...but not a gsxr 650..as they dont make one ...
                              I don't know how long the forks are though. Might be a bit on the short side for a GS.... A B-12 front end would be a likely candidate....

                              Comment


                                My question now is, why could you not just use 4 of the 88 GSXR 750 intake boots, or 4 of the 92 GSXR750 intake boots???? Was it necessary to get the correct spacing? and would the stock GS650 boots not work? I measured the GS650 carb/boot spacing to be 75-82-75 center to center in mm, that's cyl's 1-2/cyl's 2-3/cyl's 3-4 spacing, respectively.

                                '77 GS750 920cc heavily modded
                                '97 Kawasaki KDX220R rugged terrain ripper!
                                '99 Kawasaki KDX220R​ rebuild in progress
                                '79 GS425stock
                                PROJECTS:
                                '77 Suzuki PE250 woods racer
                                '77 GS550 740cc major mods
                                '77 GS400 489cc racer build
                                '76 Rickman CR1000 GS1000/1100
                                '78 GS1000C/1100

                                Comment

                                Working...
                                X