danish gsx750es

[nebo]

hello everyone i am a new member from denmark. i bought a 1986 gsx750es in august this year, and rode it a month or so before i took it all apart, because it looked like it havent been cleaned since 1986, i then painted frame forklegs and swinger black .the tank and plastic just needed some water sobe and wax polish and they were nice and shiny. i painted the engine matt black and fitted a laser 4-2-1 stainless system and this is where i am now (i will take some pics tomorrow and figure out how to post them i am better with a wrench than wit a pc and i am sorry for the bad english)
i have just ordered a leo vince sbk muffler and some new intake boots i am waiting on. and the big informaton center up front was all cracked so i replaced that with a small koso db01r
future plans is a jetkit and some kn pods because i dont have the original airbox
some lower clip ons and then just ride and have fun this summer.

[SVSooke]

Sweet! don't worry about "quality" pics we like them all.PhotoBucket is how I do all mine.Here's BassCliff's article on posting to GSR(and most other sites)http://members.dslextreme.com/users/...t_pictures.pdf .
Edit:see Cliff found your other thread.Good to go!

[nebo]

here are some pics from when i got it.

[nebo]

and another

[nebo]

and here is my little side project i know its not a gs bu it is stil a funny little machine honda cb400n

[nebo]

thanks svsooke and basscliff for the picture guide
i will rezice them abit next time. but that is how she looked before the paint and lots of sope and water.and now that you have seen my 2 girls you might as well see my dog nebo.

[SVSooke]

Tap enter(or Danish equivalent) after the img code then write.
Good looking bike.Mine was black to.Not nearly as well done.PO had sprayed over the original paint
No problem with the size either.

[nebo]

and here it is after some black paint

[nebo]

engine painted matt black just need to paint side covers white then engine is done.

[nebo]

and got the speedo wired today what pita that was. i also got stainless allenhead screws in my carbs just waiting on rubber boots so i can mount them.

[SVSooke]

BTW you can post 10 picture from PB in 1 post.Looking good there to.

[nebo]

[nebo]

okay thanks svsooke that makes things alot easier.