Announcement
Collapse
No announcement yet.
82 GS750E to GSXR1215 restomod
Collapse
X
-
Tim Tom
-
Bevo
How does it sit on its wheels, did you lose much ground clearance?
It does look nice, mine is also ready to go!
Comment
-
Bevo
Mine might go on this weekend and I am just over two inches shorter as well.
What are you doing for the bars?
Drilling the top stock clamp I have seen with a purch, not sure how strong it is.
Comment
-
I am probably gonna bolt on risers on like you said or maybe weld them on I'll let my welder guy make that call. As far as the steering it should improve some i believe a shorter tire should turn in better.sigpic1982 gs750e 1186 oil cooled engine USD front mono shock rear
1994 gsxr1100w
1981 gs1260dragbike (this one I've owned for29yrs)
Comment
-
amxsteve
you will be okay drilling the top triple and mounting risers, but your exh is gonna be close and you should probably shorten your kickstand a bit
Comment
-
Originally posted by akckhim View PostI am probably gonna bolt on risers on like you said or maybe weld them on I'll let my welder guy make that call. As far as the steering it should improve some i believe a shorter tire should turn in better.
BTW looking good. You need an 8" train light though
Comment
-
They are 750 forks for the strait bolt on convenience, and yup on the sidestand shortening the header should be ok its really tight to the side and I'm probably not brave enough to lean it that far. I am thinking or adding the thing on the bottom of the top tree to add strength like you did. I would love to have a train light but there not easy to come by. And Steve i like your headlight brackets where did they come from?Last edited by akckhim; 11-09-2012, 01:27 AM.sigpic1982 gs750e 1186 oil cooled engine USD front mono shock rear
1994 gsxr1100w
1981 gs1260dragbike (this one I've owned for29yrs)
Comment
-
amxsteve
Originally posted by akckhim View PostThey are 750 forks for the strait bolt on convenience, and yup on the sidestand shortening the header should be ok its really tight to the side and I'm probably not brave enough to lean it that far. I am thinking or adding the thing on the bottom of the top tree to add strength like you did. I would love to have a train light but there not easy to come by. And Steve i like your headlight brackets where did they come from?
Comment
-
I like the gsg brackets also looked at lsl brackets about the same money they are round tube opposed to the flat cnc of the gsg hmmm save up then make a choice. I am interested in a train light how much would it take to get one from you?sigpic1982 gs750e 1186 oil cooled engine USD front mono shock rear
1994 gsxr1100w
1981 gs1260dragbike (this one I've owned for29yrs)
Comment
-
wedoo2
I have a question about the carbon fiber treatment. In the last picture you posted it looks as though it is dull. In an earlier one it seems to have a satin look to it. Thought I would get your take.
Comment
Comment