Announcement

Collapse
No announcement yet.

78 Gs750EC Project-Restore with Moderization

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #46
    PM nvr2old, he's a pro.
    -Mal

    "The only reason for time is so that everything doesn't happen at once." - B. Banzai
    ___________

    78 GS750E

    Comment


      #47
      Well, I finally did a bunch more work, and took more pictures. I ended up pretty much finishing it today. First a picture of the tank before body fill, primer & paint.

      Comment


        #48
        And now all painted & Suzuki emblem installed and ready for the gas cap cover

        Comment


          #49
          with the cap cover installed(no camera flash)

          Comment


            #50
            Same picture as the previous but used flash(what a difference in the intensity of colors)

            Comment


              #51
              This on is the windshield that i installed, the mounts may work ok but i think I'm going to cross them so top windshield goes to bottom clamp and vise-versa for windshield bottom mount. The windshield is actually a low/sport windshield for a CanAm Spyder RS.

              Comment


                #52
                This is with the windshield, tail, seat & side panels installed

                Comment


                  #53
                  Finally....getting to the end of it......fuel tank installed and fuel lines hooked up

                  Comment


                    #54
                    Getting to the end....about 98% done....just a checkover & minor adjustments are left....only other thing I may add is a red LED bar to the license plate frame for more light/visibility in the rear(though I'm really happy with the LED tail light bulb).

                    Comment


                      #55
                      Well, it finally came out of the shop. I still have a few things to do with it when I took this picture. So I did some of that today. I installed the cam end caps. And, I took an old license plate frame...painted it gloss black and installed some super bright red LED, on the side and wired them to my brake lights(already using an LED tail light bulb). When I get the chance, I'll take a picture of the lights on while running.

                      Comment


                        #56
                        I also today changed the mount for the windshield from double horizontal supports(you can see them in the picture) to an "X" mount, much more rigid though there is still a small amount of up/down movement. When you put pressure against it, it tightens up....guess I'll just have to try it.

                        Comment


                          #57
                          I've been pretty much done for a few weeks and have waited to to get it insured & registered......So I went into the DMV this afternoon and they inform they need my title to the bike......arrggggg!!!!.....I have it, but I've moved a few times since it was last on the road and cant find it

                          Comment

                          Working...
                          X