So, things done to date:
- Got it a new battery.
- Was missing the left side frame cover; got that too.
- Painted the tank (rattle can - might need to take it for a real paint job at some point since a drop of gas already did a number on it), frame covers, and duck bill.
- Removed the rear tail light and recessed an LED light in the rear of the duckbill.
- Clubman bars.
- New, lower profile turn signals.
- PO also sent me away with an unmounted belly pan (took a bit to figure out a hardware set up to mount it).
- PO also had a Supertrapp exhaust he had never mounted because it didn't quite fit (hit the passenger peg on the left). Got a short section of exhaust pipe expanded and finishing up a bracket to hang it.
- Pulled the 4 into 1 exhaust header and put in new exhaust gaskets.
- New oil and oil filter.
- Was thinking of K&N air filters, but seems like there is consensus on this site that the stock set up is fine and changing it makes jetting a PITA.
- New plugs.
- Seat was carved up by someone with a bread knife, left rough and recovered with the original vinyl. Reshaped it and waiting for upholsterer to get to it.
Unfortunately, have not yet been able to get the engine fired. Still working on that. I think it's the points (more investigation to follow). Attached picture is the start.
Comment