Painted the front forks today in KBS rust seal, rebuilt the anti dive units as they were seized. Will put a top coat of KBS blacktop on the forks tomorrow to make sure they stay nice and glossy.
Announcement
Collapse
No announcement yet.
GSX750 Project
Collapse
X
-
Woodsy
Thanks SVSooke, yes all sorted lol
Painted the front forks today in KBS rust seal, rebuilt the anti dive units as they were seized. Will put a top coat of KBS blacktop on the forks tomorrow to make sure they stay nice and glossy.
-
Woodsy
Comment
-
I like that blue Josh...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Woodsy
-
Woodsy
Ok i'm not to sure what i'm looking at here, Apart from a Previous Owners big mess.
Now, i know this lead is needed to get power to the wiring harness of the bike so it can power the beast, however, is this correct in how its installed? Apart from the dodgy crimp connections? I'm thinking of replacing the Main Battery lead to the starter solenoid and fixing the harness power lead to go to the same terminal on the starter solenoid to tidy it up.
Cut wires, oh this looks like good news..
One Melted Fuse Box
If anyone can shed some light on the Wiring it would be appreciated!
Comment
Comment