Gs 250 restoring to riding condition

[hjacobmiller]

Jake's got a bunch of pic's in his build thread as do I, but here's my Photobucket album with them in it:

http://s594.photobucket.com/user/starpoint73/library/GS450/Dynatek?sort=3&page=1

I also did up some installation instructions for the 450 that complement the Dynatek installation instructions which I will email to you now.

One thing you probably should do before purchasing is shoot up some photos of your signal generator, particularly of the plate itself. That's the bit that I've never seen from a 250 so it would be good to know the Dynatek can replace it easily first.

I'm pretty sure it's the same plate as the 300, just different things attached. I think I remeber measuring the plate when I grabbed the mechanical advance from the 250.

Here is my photobucket album as well.

http://s1256.photobucket.com/user/hjacobmiller13/library/Dynatek%20Install

I have a similar write up to Pete's but for the 300. I think it is on my other computer. I was supposed to send it to Dynatek, but never got around to finishing it. I'll see if I can find it later tonight and send it your way.

You'll notice in my photobucket album there is a wiring diargram of what I removed from the harness while I had it open.

[1980Gs250]

Sorry I haven't been on in a while guys. So busy. Sigh

http://www.ebay.com/itm/1980-1981-1982-GS450-Igniter-Unit-32900-47020-Tested-Known-Good-/190882225156

is this the right one I need?

[pete]

Reverse parts lookup on Alpha Sports says that fits the 1980 GS250T and the 1981 GS250TX... so if one of those is yours then yep