Announcement

Collapse
No announcement yet.

Rebuilding my 1978 GS550C here...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Rebuilding my 1978 GS550C here...

    Hello all,

    Here is my 2nd GS project. It's a beauty.










    What I know:
    Points are good, carbs are clean, brand new battery, tank is clean, everything is here.

    The issues:
    It won't start. No spark on 2 cylinders. Needs a seat cover, mirror, headlight bulb, cleaned and polished.

    #2
    Wow, bike looks to be in nice shape.

    Unless you did the work on it, I wouldn't believe it.

    Good luck
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      It's all original so it has a few flaws but it's even better than I originally thought. It will polish up really nice I'm sure.

      Comment


        #4
        I washed the bike today before I unloaded it. Easier to get to the car wash... Not much rust to polish off but the engine case has some corrosion but not too bad.


        Comment


          #5
          Wow, looks to be in great shape!

          Comment


            #6
            I was just looking through the box of miscellaneous parts the dude handed me when I bought the bike. I didn't know what was there besides the headlight trim rings. Turns out he ordered over $200 worth of NOS Suzuki parts. Headlight rings, chrome turn signals, a bunch of fasteners and some other stuff. Not bad.

            Comment


              #7
              Found something shocking when I was going to check the points that the guy said he checked and verified. Dyna S. This is a game changer. I don't know squat about this system. I do know the bike still has original coils, which I don't think are good for this system.
              Last edited by Guest; 03-09-2013, 06:35 PM.

              Comment


                #8
                What a great bike you have there with part included. Happy rebuild...

                Comment


                  #9
                  Originally posted by isu2014 View Post
                  Found something shocking when I was going to check the points that the guy said he checked and verified. Dyna S. This is a game changer. I don't know squat about this system. I do know the bike still has original coils, which I don't think are good for this system.
                  The Dyna S is designed to work with stock coils.
                  Ed

                  To measure is to know.

                  Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

                  Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

                  Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

                  KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

                  Comment


                    #10
                    Originally posted by Nessism View Post
                    The Dyna S is designed to work with stock coils.
                    Yeah I guess I was reading that after I did some research. Of course Dyna wants you to buy their coils but probably not necessary.

                    The bike is buried in a snow bank now after a few days of crappy weather, covered of course. Won't get to work on it until this weekend. The previous owner claims he checked spark on all cylinders and only 1 and 3 have spark. One coil powers 1 and 4 and one coil powers 2 and 3, so what would cause only half of the coil to fire? A bad Dyna S? Incorrect timing? Bad coils? Like I said, I don't know squat about this setup.

                    Comment


                      #11
                      Originally posted by isu2014 View Post
                      Yeah I guess I was reading that after I did some research. Of course Dyna wants you to buy their coils but probably not necessary.

                      The bike is buried in a snow bank now after a few days of crappy weather, covered of course. Won't get to work on it until this weekend. The previous owner claims he checked spark on all cylinders and only 1 and 3 have spark. One coil powers 1 and 4 and one coil powers 2 and 3, so what would cause only half of the coil to fire? A bad Dyna S? Incorrect timing? Bad coils? Like I said, I don't know squat about this setup.
                      Check the wiring to make sure all in good order. Wire from Dyna S to coil, coil ~ plug wire to cylinder. Go to BikeCliff's Website and you'll find all the info to troubleshoot the problem.

                      Comment


                        #12
                        Finally got to work on the bike. Replaced all the plug caps with new NGK ones. Then I tested spark and have it on all 4 cylinders. So that's good. Not sure why the previous owner lied about not having spark. I'm checking for fuel next.

                        Comment


                          #13
                          Originally posted by isu2014 View Post
                          Finally got to work on the bike. Replaced all the plug caps with new NGK ones. Then I tested spark and have it on all 4 cylinders. So that's good. Not sure why the previous owner lied about not having spark. I'm checking for fuel next.
                          That's great , get new petcok, clean up the fuel tank & carb. Change all rubber O ring in the carb. Here some tip and info;

                          Carb rebuild tutoria from Nessim >>>
                          http://www.mtsac.edu/~cliff/storage/...d_Tutorial.pdf

                          Buy new rubber O ring for your carb ;
                          O-rings for Suzuki GS850 Mikuni Carbs

                          Petcok or other part you can find at
                          >> http://www.z1enterprises.com/
                          >> Partzilla.com - OEM Powersports Parts from Honda, Kawasaki Polaris, Suzuki and Yamaha at discounts up to 80% off MSRP
                          >> www.ebay.com or you can ask GS member here whether they have extra part

                          Last but not least >>> have fun rebuilding it...

                          Comment


                            #14
                            Thank you for the links Hakim. Carb rebuild is next.

                            I got the bike running but only on full choke. Definitely needs more gas. It pops when I give it gas and won't rev very much. The timing is probably off too but it's hard to tell when it doesn't run well to begin with. I took a video of it. Sounds like it might be missing but I'm guessing one cylinder isn't getting much gas at all.
                            Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

                            Comment


                              #15
                              I brought it back inside and took the carbs off. I found some oil in carb 2. Probably needs a valve job.



                              Comment

                              Working...
                              X