Project 700ES ( Revisited )

[GateKeeper]

I hear ya....but I got a pipe and stock air box and it's a PITA to get right as well...LOL

one day I will have to try....

it was suggested to me to just take the air filter out, and test.....see if it improves...

anyways back to your rebuild....

coming along nicely.....

.

[jwhelan65]

Hard to see the spacing but I have the outer axle hat sleeve in backwards so I could piece things together. Allows for a 120 up front...

[jwhelan65]

Hope to have the spacer cut and fitted this week. As soon as that is done I have a pile for the powder coater. Anxious to get it back on the road.

[jwhelan65]

The inner right bearing spacer from the 1150 will need to be reduced 8.5mm to line up the front wheel..I think, still doing some measuring....

[jwhelan65]

Wheels and calipers back from the powder coater along with new Core moto braided lines and color matched Supersprox..

[jwhelan65]

[jwhelan65]

The front 1150 swap to a 2.75

[jwhelan65]

Front 700 calipers matched with the 1150 rear, hanger,and Bandit brake stay.

[jwhelan65]

Finally sourced a set of these from Demonspeed Racing..

[jwhelan65]

[jwhelan65]

[jwhelan65]

[jwhelan65]

[GateKeeper]

Very nice.....

You are putting my Yamaha resto to shame....I unfortunately have had no time to do anything that is bike related, too many projects around the house at the moment, but I am almost done, then it's back to the bike....

Keep up the good work....

.

[jwhelan65]

Fork rebuild complete with Race Tech Gold Valve emulators, sonic springs, anti-dive block offs and front wheel spacing aligned for the 1150 triple.