Announcement
Collapse
No announcement yet.
Slowly Rebuilding my GS450l
Collapse
X
-
81gs450l
I am not sure what foam my upholstery guy used. I do know its 1 1/2 inches thick. I am sure you can ask an upholstery shop what they recommend. The vinyl is marine grade.
-
mash35231
-
81gs450l
I didn't get much done today. I made some brackets to keep my seat from sliding side to side and then took it for a ride.
here is a pic of the 2 cut down L brackets that I riveted to my seat pan
they were 3 in. L brackets. I left the side that riveted to the seat at 3 in. I cut the other side down to a 1 in tab
the brackets fit tight against the inside of the frame rails.
here is the seat sitting all the way down
Comment
-
81gs450l
Comment
-
Looks like a good job on the seat, and ingenious on the knob1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
81gs450l
thanks pete. I took a 60 mile ride with my cousin yesterday. I forgot all about the leaking timing chain tensioner. I guess this week sometime between work and school I am going to start on that. once my neighbor gives me the cash for the damages to my tank it will we going into paint. The wife and I are house shopping now, so that has priority. I hope to have a garage by next winter, then the real fun can begin.
Comment
-
Yes, garages are very handy! I need to get my shed built to reclaim some of my garage space and to have a room to do blasting and spraying in...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
81gs450l
well today marked a major setback. I was riding to school and when I stopped at the stop sign near my house the bike made a small bang and shut off. I went home grabbed my truck and picked up the bike. When I got home I tried to crank the engine by hand and it was stuck. I decided to pull the valve cover. What I found was a broken timing chain. It seems like part of a link broke and now the chain locked up the engine. I am so frustrated I don't know where to go from here. I am afraid of what I might find if I dig into this engine.
Comment
-
Bugger! Hopefully it just jammed on a guide or something that's not too bad, but you will at least need to get the head and cylinders off to inspect the sprocket on the crankshaft...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
Hakamisu
Originally posted by pete View PostYes, garages are very handy! I need to get my shed built to reclaim some of my garage space and to have a room to do blasting and spraying in...
Comment
-
Hakamisu
Originally posted by 81gs450l View Postwell today marked a major setback. I was riding to school and when I stopped at the stop sign near my house the bike made a small bang and shut off. I went home grabbed my truck and picked up the bike. When I got home I tried to crank the engine by hand and it was stuck. I decided to pull the valve cover. What I found was a broken timing chain. It seems like part of a link broke and now the chain locked up the engine. I am so frustrated I don't know where to go from here. I am afraid of what I might find if I dig into this engine.
Comment
-
Originally posted by Hakamisu View PostI reclaimed some of my garage by the statement "Use it or Lose it". A lot of stuff has made its way to the salvation army and more to come.
Unfortunately I'm in a 2 car garage with 2 cars and a bike and a workshop area crammed in front of one car so all the usual stuff just takes up any spare room...1982 GS450E - The Wee Beastie
1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020
sigpic
450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh
Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11
Comment
-
81gs450l
sold my 450. I have 1983 GS750es in California I need to go pick up at my dad's, which I should be getting in December. It's all stock except for a turbo kit.
Comment
Comment