Announcement

Collapse
No announcement yet.

Charmayne's rebuild of her 550L

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #91
    Yup, the ones from cruzin are tight. Gotta squeeze them in a bit but they do go in. Be certain the ends of the wavyring do not overlap. Must be endbto end.
    MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
    1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

    NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


    I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

    Comment


      #92
      Originally posted by chuck hahn View Post
      Yup, the ones from cruzin are tight. Gotta squeeze them in a bit but they do go in. Be certain the ends of the wavyring do not overlap. Must be endbto end.
      Even after Steve and I tried to force them to be end to end, we could not get them to seat properly so we could slide the cylinders down. We then removed the Cruzinimage oil separators and reused the old ones, again making sure they did not overlap. Unfortunately we now have this issue. It will be a couple of months before I can go at it again. In the meantime, she will make a trip out to my place in the next few weeks to ride it as is here to get some parking lot work in. We'll watch the oil consumption and start back in on it later this winter
      Cowboy Up or Quit. - Run Free Lou and Rest in Peace

      1981 GS550T - My First
      1981 GS550L - My Eldest Daughter's - Now Sold
      2007 GSF1250SA Bandit - My touring bike

      Sit tall in the saddle Hold your head up high
      Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
      and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

      Comment


        #93
        You do know you can dremel the ends a little to get a good fit...easy does it though. Set them in the cylinder and get about 12/1000 gap at the ends and youre in.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment


          #94
          So with some sadness but also wisdom behind it, Charmayne chose to sell her bike today to a guy near where she lives now. With two kids and just life in general, it has sat in her garage since I took it out to her a few years ago. She said she'll look at something else way off in the future, maybe even a Spyder, who knows.

          I told the guy about this forum although he was more interested in the Facebook pages instead
          Cowboy Up or Quit. - Run Free Lou and Rest in Peace

          1981 GS550T - My First
          1981 GS550L - My Eldest Daughter's - Now Sold
          2007 GSF1250SA Bandit - My touring bike

          Sit tall in the saddle Hold your head up high
          Keep your eyes fixed where the trail meets the sky and live like you ain't afraid to die
          and don't be scared, just enjoy your ride - Chris Ledoux, "The Ride"

          Comment

          Working...
          X