Announcement
Collapse
No announcement yet.
project "jailbreak"
Collapse
X
-
Tags: None
-
cliferton
-
cliferton
The way the bike is sitting now is a rough mock of where I want the bike To sit parked. I work for tricky air so this bike is going to get a suzuki hayabusa front air suspension and rear air also so ride height will be up 3-4 inches.
Haven't made up my mmind on wheels. I was going to do a 1 off set since I do the cad and write the cnc programs at tab, but I want a "factory" look so I may go with buell xb12 and do a radial mount bracket for the front wheel. I'm on the fence on wheel for now. That's about all I have for now I'll keep you up on the progress. Hope I didn't hurt any feelings by cutting the bike in half. That's when I decided on the name while I was cutting the bars. I like it cool name and that's what you would most likely do after a bankjobLast edited by Guest; 10-09-2014, 12:11 AM.
Comment
-
Looking good.
Most of the guys that cut on a bike have bobbers and/or choppers in mind, which basically make the bike worthless as a RIDING vehicle. Your goal should really enhance the riding qualities, so will probably be received quite well.
And, you also appear to have a nice shop with decent resources, as well as the knowledge how to use them.
Keep the pictures coming.
.Last edited by Steve; 11-12-2014, 12:09 AM.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Crank
-
Kowalski
I don't know about the exhaust on the te black and orange bike. It's routed directly in front of the carbs. It does look really cool though. Good luck with your build.
Comment
-
Are you sure you are looking at the exhaust?
The exhaust does go near the carb intakes on its way to the top of the frame to exit under the seat, but all the tubing is on the other side. The shiny "pipes" that you see on this side appear to be braided stainless oil lines.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Kowalski
Originally posted by Steve View PostAre you sure you are looking at the exhaust?
The exhaust does go near the carb intakes on its way to the top of the frame to exit under the seat, but all the tubing is on the other side. The shiny "pipes" that you see on this side appear to be braided stainless oil lines.
.
Comment
-
cliferton
The pipes on mine will be short and under the bike kind of what is on the bike now but way shorter. going to use the area under the tail to hide air ride stuff, batt, electrical stuff
Comment
-
cliferton
Comment
-
cliferton
-
cliferton
-
Gonzo709
-
cliferton
Comment