Announcement

Collapse
No announcement yet.

1984 Katana 7/11

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Always nice to check out your progress, Pete. Looks like your booth is working out just fine. I get the brush on first coat suggestion. I've actually sprayed it really thick, let it tack a bit, and used my fingers to rub it into pinholes and scratches first go around. 180 grit would be good to block sand it with the first time. Prime and then 400 for the second go 'round. Maybe a quick go-over with 600 before the base coat and it should be good to go. Nice work so far.
    1979 GS1000S,

    1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

    Comment


      Cheers Larry, yeah the booth is working well, very happy with it!

      I was thinking 300 to 400 for the first go but I reckon you're right, 180 will make a quicker job of it for sure without being too aggressive. The front guard's going to need some effort as I seem to have sanded back possibly a little too far into the plastic and some of the fibres have popped out. I'll need to pay extra attention there, nothing a bit of time and elbow grease can't fix.
      1982 GS450E - The Wee Beastie
      1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

      sigpic

      450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

      Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

      Comment


        Make sure you hit it with high pressure air after, perpendicular to the surface close to the surface. This clears sanding partials from pin holes. More than once I have sanded and did a wipe down, light blow and sprayed Color. Then the paint draws the dust out of the hole to form a pin hole in your Color coat! A real ****er!

        For high build I up the size of my spray nozzle to lay it on really wet. I have done the brush on thing before but I found it just increased the amount of sanding of high spots.

        As always it's looking great!
        1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
        1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D

        I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.

        Comment


          Originally posted by pete View Post

          I was thinking 300 to 400 for the first go but I reckon you're right, 180 will make a quicker job of it for sure without being too aggressive. The front guard's going to need some effort as I seem to have sanded back possibly a little too far into the plastic and some of the fibres have popped out. I'll need to pay extra attention there, nothing a bit of time and elbow grease can't fix.
          I hope the advise that I (and Fjb) give is helpful and not intrusive or eye-roll-inducing, Pete. I sometimes worry about it because you're really doing a nice job. Your patience is obvious. The 180 really is a good choice for the first block. It needs to cut quickly and cleanly at this stage because you're still basically shaping the parts. 400 will just saw away at it and drive you crazy. Once you get a nice second round on it w/o runs and brush strokes-n-stuff..the 400 will work really well at that stage. Sounds like the fender might even need a third round to bury the fibers. No biggee. Whatever it takes because you need to bury it good not to show in the final color coat. Carry on, sir..
          1979 GS1000S,

          1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

          Comment


            As always cheers for the advice guys! Will definitely give them a blast with air, I definitely want it all nice and clean before starting the next coat.

            I'm using my 1.7mm gun for the primer so it should be putting down plenty of primer

            Larry, all the advice I get is greatly appreciated and listened to. Despite doing this once before I still have much to learn! Especially this time around as a significant amount will be gloss black and I want to make sure I do a better surface prep job than last time. I can still see some annoying marks in the 450's front mudguard and a couple of little pin holes in the tail piece and I don't want to repeat that this time around.

            The 180 makes good sense to me now, so thanks again kind sir!

            While there's a bit of a time constraint in terms of my holiday time off work, I want to make it count and get the prep work right. I figure I'll only need 3 days to do the actual paint... one day for gloss black and let is set up over night. Next day is mask off and silver, then let it set up over night. Third day remove masking and do the clear coat. As long as each layer is within 24 hours of the last coat all will be fine.

            I've got some 100W work lights I can set up in the shed that will warm it up in there after I finish spraying to help it cure as well, plus some tack cloths to help prep for the next layer etc.

            I also had a bit of a score on eBay and found an aluminium muffler for $48 plus postage. Should scrub up ok.

            Untitled by starpoint73, on Flickr

            It'll possibly be a little on the noisy side... straight through! Internal diameter is 61mm which is pretty close to the collector side of the headers I have. I may have to stick one of those cheapy eBay baffles inside when it comes to safety certificate time.

            Untitled by starpoint73, on Flickr
            1982 GS450E - The Wee Beastie
            1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

            sigpic

            450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

            Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

            Comment


              I was thinking after I posted yesterday... I don't need 3 days to do the paint, two will suffice. If I do the black in the afternoon, I can do the masking then silver early the next morning followed by the clear probably an hour or so afterwards, which will keep the black well within the 24 hour period.

              I saw an update from you via email Larry but don't see it here? Did you re-think it? I also have a couple of grey scotchbrite pads to scuff up the primer before laying down the black too.

              I think it's only sensible to use the compressed air trick after that and before the black as well, along with some wax and grease remover.
              1982 GS450E - The Wee Beastie
              1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

              sigpic

              450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

              Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

              Comment


                I'd use the baffle just to be safe. Only for inspection
                I build Pipers

                https://farm5.staticflickr.com/4842/...b592dc4d_m.jpg

                Comment


                  I saw an update from you via email Larry but don't see it here? Did you re-think it? I also have a couple of grey scotchbrite pads to scuff up the primer before laying down the black too.

                  I think it's only sensible to use the compressed air trick after that and before the black as well, along with some wax and grease remover.[/QUOTE]

                  I did reply, Pete, until I saw that you posted the 24 hr. period. What I was suggesting is basically what you've decided to do. I would spray the black, and if you do wait overnight, even if it's within the time span, I would still play it safe and scuff up the black with some 600 ( a grey SB pad would be similar grit), mask, spray the silver, wait 30 minutes or so and let the silver tack up, unmask it, and then spray your clear all in one fell swoop. It can all be done in 2 steps that way.
                  1979 GS1000S,

                  1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                  Comment


                    I'll likely have to Brandon, don't want to have it knocked back due to noise when there's a simple fix...

                    Cheers Larry, that makes sense. I'm all keyed up now, just gotta get out and do that sanding of the guide coat and high build now.

                    At this stage the weather looks like it will clear up after this weekend, so I might get a lot more of my three weeks off with suitable weather to paint which would be fantastic. The sooner I can get the bodywork done the better chance I can get the crankcases painted during my time off as well.
                    1982 GS450E - The Wee Beastie
                    1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                    sigpic

                    450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                    Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                    Comment


                      Nothing pic wise to update as I've spent less than 10 minutes on wet sanding the front mudguard with 180 grit so far yesterday. It's doing the job very nicely. The surface is very rough from the plastic fibres coming through, but getting very smooth where I've sanded, so I suspect I will only need primer surfacer after this, not more high build, although I'll wait and see how it turns out.
                      1982 GS450E - The Wee Beastie
                      1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                      sigpic

                      450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                      Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                      Comment


                        Actually two questions...

                        The grey scotchbrite pads... use them wet or dry? And I assume they're good to use until they no longer feel like they're doing the job same as sandpaper? I've never used them before...

                        Also, I've gotta break out that brand new fuel tank and get it prep'd for primer, reckon 400 wet sanding will be too coarse or good? For some reason I have an abundance of 400 grit paper I discovered yesterday... I've got 600 there too if the 400 will be too much.
                        1982 GS450E - The Wee Beastie
                        1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                        sigpic

                        450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                        Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                        Comment


                          Wet for everything.

                          Why you priming the new tank? It has factory paint, correct? If so scuff with 600 wet minimum, wash with water then dry and then solvent wipe and base clear.

                          Is the 400 used or new? I always keep used wet paper, it looses its coarseness, and becomes an in-between grit, but lasts a long long time when it is used wet.
                          1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
                          1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D

                          I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.

                          Comment


                            Cool, I figured wet was right so good to get confirmation.

                            why prime the tank? I figured that was the best way to go forward for best result, but yes good silver (incorrect not 13L though) so just scuff it back then lay the black down will be ok? Cool.

                            i also save my used wet paper, it does get a lot of use, however the excess 400 I have is all new. I assume I missed checking my stash before buying some.
                            1982 GS450E - The Wee Beastie
                            1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

                            sigpic

                            450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

                            Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

                            Comment


                              I'm sure Larry will be along with advice, he is probably more knowledgable than me, I think he did it for a living at one time.
                              1978 Gs1085 compliments of Popy Yosh, Bandit 1200 wheels and front end, VM33 Smoothbores, Yosh exhaust, braced frame, ported polished head :cool:
                              1983 Gs1100ESD, rebuild finished! Body paintwork happening winter 2017:D

                              I would rather trust my bike to a technician that reads the service manual than some backyardigan that THINKS HE KNOWS how to fix things.

                              Comment


                                I would scuff your entire tank with 600 wet, Pete. It's got the perfect base for the new silver. Scotch Bright pads work well wet or dry. Use em till they fall apart. I would also recommend using the high build primer at least twice. Block it the second time with 400 and then smooth it out with a final sand with 600 wet. The silver needs to go onto a 600 surface.
                                1979 GS1000S,

                                1982 Honda CX500 Turbo, 1982 Honda MB5 w/CR80 motor, 1977 Honda "nekid" Goldwing, 1976 Honda CB550F cafe', 1972 Honda XL250 cafe'

                                Comment

                                Working...
                                X