Time for another GS11 Resto-Mod

[mikerophone]

Subbed and look forward to this!

[isleoman]

http://www.thegsresources.com/_forum/showthread.php?152341-Rear-Set-Mounting-Plate-Design&highlight=rear+sets

Joe,

Happy building on the next one. There are subtle differences between the 83 and 82 mounting points on the frame. So be sure and check your existing templates on your 83 frame before making your mounting plates out of aluminum.

For others the dimensions for the 83 rear set mounting blocks are in the link above and should give you all you need to provide to a water jet device or a machinist. It can be done with home tools and a welder but will take much longer. The holes for the rear sets are spaced for ZX12 Kawasaki parts but if you have or want to use something else just change those holes.

[jwhelan65]

http://www.thegsresources.com/_forum...ight=rear+sets

Joe,

Happy building on the next one. There are subtle differences between the 83 and 82 mounting points on the frame. So be sure and check your existing templates on your 83 frame before making your mounting plates out of aluminum.

For others the dimensions for the 83 rear set mounting blocks are in the link above and should give you all you need to provide to a water jet device or a machinist. It can be done with home tools and a welder but will take much longer. The holes for the rear sets are spaced for ZX12 Kawasaki parts but if you have or want to use something else just change those holes.

Thanks Isleo, you get all the credit on these.

[Vmass]

Subscribed, I will go delete my 1100E thread.

[mikerophone]

Nah, don't do it although not everyone can keep up with Joe, we can all benefit from each other's threads.

[jwhelan65]

Thinking on pulling the trigger on ne of these...would like to see one on the bike first somewhere.

[dorkburger]

Here's where I make myself sound dumb. What is it? I can't tell without context.

Looking forward to this build also.

[jwhelan65]

Here's where I make myself sound dumb. What is it? I can't tell without context.

Looking forward to this build also.

Replaces the stock sprocket cover

[dorkburger]

Got it. Thanks. Fancy looking for sure. In my pathetic world it would be another spot that would show more oil, old chain lube and dirt..

[leedutcher]

I got one but I opt for the powder coated black one...very nice piece. Make my motor look like ****...lol..only because I agent cleaned mine up well yet... Pm me and I'll shoot you a pic via phone number if that's cool mines 6419038814

[isleoman]

Do you then have to keep your now visible front sprocket clean? Nice kit. You'll have to sell your 1970's bell bottoms.

[jwhelan65]

Do you then have to keep your now visible front sprocket clean? Nice kit. You'll have to sell your 1970's bell bottoms.

I have a Velcro strap for the potential bell bottom mishap....

[nvr2old]

Hello, Joe...come in, Joe..are you out there...? Been a long time since we heard from you....

[jwhelan65]

Parts list still coming together on this, had the bodywork done in the stock blue. Pics to come.....

[jwhelan65]

GS11 (1).jpg

Ok lets get this moving along.....