.png "Powered by vBulletin")
Some updates. It's nearly done. I can't wait to finish a stinkin' project...
I've finally found a home for pretty much all of the electronics under the seatpan. I've routed the wires and now just need to do a little nipping, tucking, and tidying up. The little belly bulge I made for the battery didn't quite end up deep enough (needs about 1/8" more depth) so I'm going to have new pieces cut for the front pan and re-do it. No biggie because I've got extra material. I'm going to 3D print brackets for each component housed in the electronic trays so everything is secured, but now that I've got a basic layout figured out it will be easy.
I've finally found a home for pretty much all of the electronics under the seatpan. I've routed the wires and now just need to do a little nipping, tucking, and tidying up. The little belly bulge I made for the battery didn't quite end up deep enough (needs about 1/8" more depth) so I'm going to have new pieces cut for the front pan and re-do it. No biggie because I've got extra material. I'm going to 3D print brackets for each component housed in the electronic trays so everything is secured, but now that I've got a basic layout figured out it will be easy.
Comment