.png "Powered by vBulletin")
I've never worked on an 1100 but I think I know how you feel about the starter gears. all I can say is I've put that part together many times and never had a problem. So I guess if it's set up right and feels like it's going together right then it probably is.
-
2002 bmw r1150gs 1978 gs1000E skunk les pew 1979 gs1000L dragbike
82 gs1100L probably the next project
1980 gs1000G the ugly 1978 gs750E need any parts?
https://m.youtube.com/watch?v=m_m2oYJkx1A
1978 gs1000E skunk #2 RLAP
https://live.staticflickr.com/65535/...2f1debec_t.jpg -
Make sure all the parts (especially washers) are in there properly.
Use a parts diagram for guidance.
sigpic
SUZUKI: 1978 GS1000E; 1980 GS1000G; 1982 GS650E; 1982 GS1100G; 1982 GS1100E; 1985 GS700ES
HONDA: 1981 CB900F Super Sport
KAWASAKI: 1981 KZ550A-2; 1984 ZX750A-2 (aka GPZ750); 1984 KZ700A-1
YAMAHA: 1983 XJ750RK Seca
Free speech is the foundation of an open society. Each time a society bans a word or phrase it deems “offensive”, it chips away at that very foundation upon which it was built.
Comment
-
Hi Frank. Nice bike!
Question. Do you have the center stand for the bike? Your first pic shows the bike leaning on the side stand, which would cause the starter gears to naturally fall out. If you can get the bike standing exactly straight up or a little to the right (braced of course), the gears will stay in position while you mount the stator cover. If you need a center stand, I have 2 or 3 spares from previous 1100e builds. And too many other parts. pm me thru the site if you need anything.
John.81 GS1100e
83 GS1100e
67 Norton P11(someday soon I'm gonna kick it alive and ride it!)
A couple of KZ400's
Be Here Now Until You're There Then
Comment
Comment