I found this bike rode hard and left outside wet a while back although it ran great. No engine teardown was needed but the rest of the bike was a full restoration down to every last bolt. List of mods is below the pic, no changes to suspension geometries or riding stance.
1982 GS750E .jpg
Removed 5 from rear subframe by cutting behind shock mount, lifting the cut off section on top of the frame rail and sliding it forward 5 then welding subframe on top of remaining frame
Raised rear of fuel tank 2
Raised side cover mounts 2
New single seat with handmade wooden base
Stripped, degreased and painted engine with VHT paint then baked to cure
Replaced large dashboard type instrument cluster with separate tach/speedo units, cut down instrument stalk between the gauges to remove gear indicator and fuel gauge
Replaced front turn signals with smaller ones. Integrated rear turn signals into side cavities in taillight
Replaced stock handlebars with superbike bend handlebar
Modified front fender (shortened)
Powdercoated frame and wheels
New paint on all body panels with hand pinstriping to reflect original stripe design and colors
Stainless steel Galfer brake lines, rebuilt brake masters and calipers, new brake pads
Stock exhaust with Ceracote "chrome" finish
New sprockets and drive chain
Progressive shocks
New Continental tires
Comment