Announcement

Collapse
No announcement yet.

1100 Katana restomod with 1230 engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    I believe I just hit another issue today...
    As I was going to install the cylinder block, I realized that the cylinder studs might be of a different length between an 1100 and a 1150 head?
    There goes another order to APEracing for heavy duty studs!
    Given the difficulty of fitting the pistons in the cylinders, I decided to fit the pistons in the block first and thereafter slide the piston pins in place when the block is lowered on the bottom case.
    I've never tried this method?
    Will it work?
    sigpicJohn Kat
    My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
    GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020

    Comment

    Working...
    X