Steering head sticker

[Stigman95]

Greetings,
I've been reading a lot of threads here for the past week and I haven't read any about sandblasting the frame. Before I do, I need to know if reproduction stickers are available. I've contacted Suzuki and they refer me to my local dealer. I've been raped by dealers before. Not fun.

[allojohn]

Crappy website but this guy can do it.

[Zerospirit]

Crappy website but this guy can do it.

Aww man. I checked that site right when you posted and 77 GS750 was on the list. But now almost the entire list got removed.

[salty_monk]

Make your own & have it printed on vinyl.... Or carefully remove it & save it. Do you need it to register the bike? The frame is stamped in any case... Here in CA they would want it but only if it needs to go for inspection (which doesn't happen unless it's out of state or 7 years out of registration). I imagine a lot of other states would just take the frame stamp no?

[Grimly]

Aww man. I checked that site right when you posted and 77 GS750 was on the list. But now almost the entire list got removed.

"If your model is not listed, please contact us to determine if we are able to reproduce your VIN."

http://www.bdesigns.ca/vin_models_available.pdf
The 78 GS750 is on that.

[grcamna2]

I am considering carefully removing the original Suzuki factory frame sticker and cleaning the old adhesive off the back of it and then using quality glue,re-applying it;have any of you done that process and how did it work ?

[salty_monk]

I've done it that way. It's tough because it's a really thin foil & not designed to come off. I've also masked around it....

[grcamna2]

I've done it that way. It's tough because it's a really thin foil & not designed to come off. I've also masked around it....

Can you recommend a good adhesive that may have worked for you ? I can get standard contact cement but if there's some better product that will hold as good as the original,I'm all for it.