750 Katana Resurrection

[KiwiAlfa156]

Decision made

[GSXR7ED]

I like two tones...three tones...not so much.

Glad you're taking the constructive criticism...I'm sure you kinda figured what people would say.

I'm sure we all appreciate what you're doing so THANKS!

Ed

****

[KiwiAlfa156]

Thanks for your thoughts. I've decided that I'm going to do a light clear coat (flat back), apply the decals, sit the tank and panels on the chassis and then make a decision on red white or none. I'll coat over everything with a couple more coats of clear.

[storm 64]

I like the added RED stripe. It really catches the eye.

[Nessism]

I kinda like the white, or none. Not a huge fan of the red, but it certainly doesn't look bad.

[Rich82GS750TZ]

I'm w/ Steve. Sometime you gotta know when to stop. You asked for opinions, that's mine.

[steve murdoch]

Just the gold and black for me.

[KiwiAlfa156]

Ok... white pinstripe, red pinstripe or no pinstripe? Each works with other colours on the bike. So what are you thoughts?

[nvr2old]

Hi there, and thanks. I'll be 'flatting back', so just using a fine scotchbrite to take of any nibs and dust that has fallen onto the colour prior to applying clear. And to key in the clear, as you suggest. So no "flat black"

Ohhhhh..duh, Larry. Flat "back"..ha ha..I guess I should pay closer attention to what I'm reading.

[KiwiAlfa156]

The paint job is looking real nice. Out of curiosity, may I ask what your use of flat black will be before the decals and the addition of clear coats? If waiting more then 24 hrs. between base coats and clear, you might consider scuffing the base coats lightly with some 600 just to be on the safe side. Looking forward to the finished project.

Hi there, and thanks. I'll be 'flatting back', so just using a fine scotchbrite to take of any nibs and dust that has fallen onto the colour prior to applying clear. And to key in the clear, as you suggest. So no "flat black"

[nvr2old]

The paint job is looking real nice. Out of curiosity, may I ask what your use of flat black will be before the decals and the addition of clear coats? If waiting more then 24 hrs. between base coats and clear, you might consider scuffing the base coats lightly with some 600 just to be on the safe side. Looking forward to the finished project.

[KiwiAlfa156]

That is beautiful work on the paint job!

Great work on everything else too.

Thanks for documenting your build.

Ed

****

Thanks Ed, for your kind words. Been a slow process as I'm 'time poor', but finishing the body work will be a real milestone. Bodywork, electrical and rolling chassis will be complete, and only engine and exhaust remain to do. Painting is rewarding because all the prep work finally begins to bear fruit and you see results. I've decided that I will do a complete tear down of the gearbox as the bike has had a very hard life and I'd kick myself if I got everything buttoned up and it jumps out of gear, or worse. Of course I'll be documenting that process too.

[GSXR7ED]

That is beautiful work on the paint job!

Great work on everything else too.

Thanks for documenting your build.

Ed

****

[KiwiAlfa156]

My first attempt at painting a second color and masking pin stripes. Actually it's the second time I've spray painted a bike bodywork. A few tiny bleeds but all nowhere they will be obvious.



Black Pearl









I'm tossing up whether to add some white or silver pin stripe tape. Either way I'll spray clear, flat back, apply the decals and then lay wet coats of clear.

[dorkburger]

I like that color. Resembles the original Hayabusa.